Public Health Service |
|
42 CFR 52b.12(b) |
AIHA Publication |
1994 |
Laboratory Ventilation Workbook
|
American Industrial Hygiene Association |
Public Health Service |
|
42 CFR 37.10(b)(1) |
AAPM Report No. 14 |
1985 |
X-Ray Generators and Automatic Exposure Control Devices, Report of the Diagnostic X-Ray Imaging Committee Task Group on Performance Specifications and Acceptance Testing for X-Ray Generators and Automatic Exposure Control Devices
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 84.41(h) |
MIL-STD-105D |
1963 |
Sampling Procedures and Tables for Inspection by Attributes
|
U.S. Department of Defense |
Public Health Service |
|
42 CFR 52b.12(c)(7)(iii) |
NFPA 99 |
1996 |
Standard for Health Care Facilities
|
National Fire Protection Association |
Public Health Service |
|
42 CFR 37.10(f)(7) |
DICOM Standard PS 3.16-2011 |
2011 |
Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource
|
National Electrical Manufacturers Association |
Public Health Service |
|
42 CFR 37.44(g) |
AAPM Report No. 74 |
2002 |
Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Plumbing Code |
1997 |
International Standard Plumbing Code
|
Southern Building Code Congress International |
Public Health Service |
|
42 CFR 37.10(b)(3) |
AAPM Report No. 31 |
1990 |
Standardized Methods for Measuring Diagnostic X-Ray Exposures, Report of Task Group 8, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 84.79(d) |
CGA G-7.1 |
1996 |
Commodity Specification for Air
|
Compressed Gas Association |
Public Health Service |
|
42 CFR 52b.12(c)(7)(iv) |
NFPA 101 |
1997 |
Life Safety Code
|
National Fire Protection Association |
Public Health Service |
|
42 CFR 37.42(h)(1) |
AAPM Report No. 74 |
2002 |
Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 37.44(g) |
AAPM Report No. 116 |
2009 |
An Exposure Indicator for Digital Radiography, Report of AAPM Task Group 116
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 52b.12(b) |
SBCCI Standard Building Code |
1997 |
Standard Building Code
|
Southern Building Code Congress International |
Public Health Service |
|
42 CFR 37.10(b)(4) |
AAPM Report No. 74 |
2002 |
Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
Public Health Service |
|
42 CFR 84.141(c) |
CGA G-7.1 |
1966 |
Commodity Specification for Air
|
Compressed Gas Association |
Public Health Service |
|
42 CFR 52b.12(c)(7)(v) |
NFPA Publication |
1996 |
NFPA Health Care Facilities Handbook
|
National Fire Protection Association |
Public Health Service |
|
42 CFR 37.42(h)(1) |
AAPM Report No. 14 |
1985 |
X-Ray Generators and Automatic Exposure Control Devices, Report of the Diagnostic X-Ray Imaging Committee Task Group on Performance Specifications and Acceptance Testing for X-Ray Generators and Automatic Exposure Control Devices
|
American Association of Physicists in Medicine |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
AAR Publication |
1988 |
AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment
|
Association of American Railroads |
Research and Special Programs Administration |
|
49 CFR 172.401(c)(4) |
TDG Regulations |
2005 |
Transportation of Dangerous Goods Regulations
|
Canadian Department of Transportation, Transport Canada |
Research and Special Programs Administration |
|
49 CFR 173.32(b)(4) |
TDG Regulations |
2005 |
Transportation of Dangerous Goods Regulations
|
Canadian Department of Transportation, Transport Canada |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (25) |
APHA Method 4500-F D |
1997 |
Fluoride by SPADNS Method
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 178.46(h)(2) |
ASTM E290 |
1992 |
Standard Test Method for Semi-Guided Bend Test for Ductility of Metallic Materials
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 180.407(g)(3) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section V
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 179.102-4(a)(2)(i) |
ASTM A20/A 20M |
1993 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192.147(c) |
ASME B16.1 |
1998 |
Cast Iron Flanges and Flanged Fittings, Classes 25, 125, 250 and 800
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
42 CFR 418.110(d)(1)(i) |
NFPA 101 |
2000 |
Life Safety Code
|
National Fire Protection Association |
Research and Special Programs Administration |
|
49 CFR 195.264(b)(1) |
API 620 |
2002 |
Design and Construction of Large Welded Low Pressure Storage Tanks
|
American Petroleum Institute |
Research and Special Programs Administration |
|
46 CFR 108.101(b) |
ASTM F1014 |
1992 |
Standard Specification for Flashlights on Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
TTMA RP No. 61 |
1998 |
Performance of Manhole and/or Fill Opening Assemblies
|
Truck Trailer Manufacturers Association |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (25) |
APHA Method 4500-F E |
1998 |
Fluoride by Complexone Method
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 173.416(b) |
IAEA TS-R-1 |
1996 |
Regulations for the Safe Transport of Radioactive Material
|
International Atomic Energy Agency |
Research and Special Programs Administration |
|
49 CFR 178.337-2(b)(2)(i) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 178.57(d)(5) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(12) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Institutional (837)
|
Washington Publishing Company |
Research and Special Programs Administration |
|
49 CFR 179.20 |
AAR Specification M-1002 |
2000 |
AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars
|
Association of American Railroads |
Research and Special Programs Administration |
|
49 CFR 192.279 |
ASME B16.5 |
2004 |
Steel Pipe Flanges and Pipe Fittings
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(10) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Dental (837)
|
Washington Publishing Company |
Research and Special Programs Administration |
|
49 CFR 192.933(a)(1) |
ASME B31G |
2004 |
Manual for Determining the Remaining Strength of Corroded Pipelines
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
46 CFR 111.30-19(a)(1) |
IEEE 45 |
1998 |
Recommended Practice for Electrical Installations on Shipboard
|
Institute of Electrical and Electronics Engineers |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 173.124(a)(3)(ii) |
UN Publication |
2003 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
|
United Nations |
Research and Special Programs Administration |
|
49 CFR 173.469(a)(4)(ii) |
ISO 9978 |
1992 |
Sealed Radioactive Sources--Leak Test Methods
|
International Organization for Standardization |
Research and Special Programs Administration |
|
49 CFR 178.345-1(f) |
ASME B&PV Code |
1992 |
Boiler and Pressure Vessel Code, Section VIII, Division 1
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 178.68(l)(2) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C13 |
ASTM F1055 |
1998 |
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 179.201-5(b) |
ASTM A240/A 240M |
1999 |
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192.65(a) |
API RP 5L1 |
2002 |
Recommended Practice for Railroad Transportation of Line Pipe
|
American Petroleum Institute |
Research and Special Programs Administration |
|
49 CFR 193.2801 |
NFPA 59A |
2001 |
Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
|
National Fire Protection Association |
Research and Special Programs Administration |
|
49 CFR 195.3(c) B15 |
API RP 2350 |
1996 |
Overfill Protection for Storage Tanks in Petroleum Facilities
|
American Petroleum Institute |
Research and Special Programs Administration |
|
49 CFR 118(a) |
MSS SP-75 |
2004 |
Specification for High-Test Wrought Butt Welding Fittings
|
Manufacturers Standardization Society of the Valve and Fittings Industry |