This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75.6(a)(40) | ASTM D 5291 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Coast Guard | 46 CFR 169.703(c)(5)(i) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.146(b) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Research and Special Programs Administration | 49 CFR 173.63(f)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Busan 40 [Potassium N-hydroxymethyl-N-methyldithiocarbamate]) | EPA Method 630 | 1993 | Dithiocarbamate Pesticides by UV-VIS Spectrophotometer | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.65(d)(1)(i)(B) | IAUSTP | 1994 | Iowa Regulatory Requirements Applicable to the Underground Storage Tank Program | State of Iowa | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) | AGA Report No. 3, Part 3 | 1992 | Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications | American Gas Association | |
Coast Guard | 46 CFR 63.05-1(f)(1) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.3 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(c) | TAPPI Method T266 | 2006 | Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absorption Spectroscopy (Reaffirmation of T 266 om-02), Draft No. 2 | Technical Association of the Pulp and Paper Industry | |
Environmental Protection Agency | 40 CFR 86.1866-12(b)(2)(ii) | SAE J-1711 | 1994 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.010-3(a)(15) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.870(c)(3) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
National Archives and Records Administration | 36 CFR 1234.4 Fire barrier wall | NFPA 221 | 1994 | Standard for Fire Walls and Fire Barrier Walls | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S25.4(a)(1) | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 184.1911(b) | Food Chemicals Codex | 1981 | Triethyl Citrate | National Academy Press | |
Federal Railroad Administration | 49 CFR 232.603(a)(3) | AAR S-4220 | 2002 | ECP Cable-Based Brake DC Power Supply—Performance Specification, Version 2.0 | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 147.2550(a)(1) | WYUIC regulations | 1977 | Wyoming Environmental Quality Act, Wyoming Statutes sections 35-11-101 through 35-11-115, and 35-11-301 through 35-11-305 (1977 Republished Edition and 1989 Cumm. Supp.) | State of Wyoming | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (28) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Color) | APHA Method 2120 B | 1995 | Color by Visual Comparison | American Public Health Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3870(f)(3) | ASTM D 465 | 1982 | Standard Test Method of Test for Acid Number of Rosin | ASTM International | |
Minerals Management Service | 30 CFR 250.198(i)(4) | ASTM C 330 | 2005 | Light-Weight Aggregates for Structural Concrete | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.13030(c) | ASME B&PV Code | 1977 | Boiler and Pressure Vessel Code, Sections I-VII | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.948(a)(2) | ASTM D 629 | 1988 | Standard Test Method for Quantitative Analysis of Textiles | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-5000-1(L) | 2001 | Leg Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (26) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Oxamyl) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.104a(j)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1616.5(c)(4)(ii) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Food and Drug Administration | 21 CFR 184.1408(b)(1) | AOAC Journal | 1982 | AOAC Methods 19.CO1 through 19.CO4 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 11A | 2014 | High Expansion Foam Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (6) | USEPA Publication | 2001 | List of Designated Reference and Equivalent Methods | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.25-5(a) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE S276.2 | 1971 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.200-13(a) | AAR Publication | 2000 | Specification for Tank Cars, Appendix E | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 90.509(a) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(i) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Coast Guard | 21 CFR 155.3(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(i) | ISO 1675-1985(E) | 1985 | Plastics—Liquid resins—Determination of density by the pyknometer method, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (29) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M081 | 1987 | Left leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | ASTM D 3645 | 1997 | Beryllium by Flame Atomic Absorption | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table ID Footnote 4 | USGS Publication | 1987 | Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3 | U.S. Geological Survey | |
Coast Guard | 46 CFR 160.076-37(b) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9070A | 2004 | See Method 1664, Publication No. EPA-821-R-98-002 | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Average Heat Release Rate | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 160.077-19(c)(11) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(5) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 178.60(p)(1)(v) | CGA C-12 | 1994 | Qualification Procedure for Acetylene Cylinder Design | Compressed Gas Association |