Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
| Rural Utilities Service | 7 CFR 1755.910(e)(3)(iv) | ASTM D 822 | 1989 | Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus | ASTM International | |
| Coast Guard | 46 CFR 160.171-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7131 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(23) | NACE MR0175-2003 | 2003 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments | National Association of Corrosion Engineers | |
| Environmental Protection Agency | 40 CFR 60.17(G)(161) | ASTM D 4468 | 2000 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry | ASTM International | |
| National Highway Traffic Safety Administration | 49 CFR 572.36(i) | SAE J-211 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
| Rural Utilities Service | 7 CFR 1755.390(k)(7)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
| Environmental Protection Agency | 40 CFR 92.9(b)(2)(iii) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
| Energy Department | 10 CFR 431.76(d)(1) | ANSI Z21.47 | 1998 | Gas-Fired Central Furnaces | American National Standards Institute | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
| Minerals Management Service | 30 CFR 250.1202(g)(3) | API MPMS | 2013 | Chapter 12, Section 2, Part 3 | American Petroleum Institute | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency | |
| Coast Guard | 40 CFR 60.17(g)(192) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
| Environmental Protection Agency | 40 CFR 60.17(g)(141) | ASTM D 4017 | 1981 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1926.303(c)(3) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
| Coast Guard | 46 CFR 164.120-5(b)(2) | ASTM D 570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
| Coast Guard | 46 CFR 160.076-11(b)(3) | UL 1191 | 2008 | UL Standard for Safety for Components for Personal Flotation Devices, Fourth Edition including revisions through August 24, 2011 | Underwriters Laboratories, Inc. | |
| National Highway Traffic Safety Administration | 49 CFR 572.173(b)(1)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 272.2 | 1978 | Silver (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 98.334(b)(2)(iii) | ASTM C 25 | 2006 | Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph 200 | American Society of Mechanical Engineers | |
| Coast Guard | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(c)(4) | ANSI/RESNA Standard WC/Vol. 1, Section 13 | 1998 | Wheelchairs: Determination of Coefficient of Friction of Test Surfaces | Rehabilitation Engineering and Assistive Technology Society (RESNA) | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1659 | 1993 | The Determination of Dazomet in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 147.1050(a)(5) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 04, promulgated and effective as of March 1, 1989 | State of Maryland | |
| Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(e) | ASTM D 3173 | 2003 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
| Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.3 | 1980 | Plastic Lavatories | American National Standards Institute | |
| Coast Guard | 46 CFR 111.105-31(e) | IEC 60092-502 | 1999 | Electrical Installation in Ships, Part 502: Tankers—Special Features | International Electrotechnical Commission | |
| Research and Special Programs Administration | 49 CFR 192.191(b) | ASTM D 2513 | 1999 | Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings | ASTM International | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-4, Method 7D, Section 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
| Environmental Protection Agency | 40 CFR 86.1867-12(a) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
| Coast Guard | 33 CFR 127.313(b) | NFPA 30 | 1993 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl ether) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
| Housing and Urban Development Department | 24 CFR 200.929(b)(2) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1917.3(b)(10) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
| Public Health Service | 42 CFR 37.44(g)(2) | AAPM Report No. 31 | 1990 | Standardized Methods for Measuring Diagnostic X-Ray Exposures, Report of Task Group 8, Diagnostic X-Ray Imaging Committee | American Association of Physicists in Medicine | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(e)(3) | MIL-S-21711E | 1982 | Shoes, Women's, including Amendment 2, October 14, 1994 | U.S. Department of Defense | |
| Federal Highway Administration | 23 CFR 625.4(b)(8) | ANSI/AASHTO/AWS D1.5 | 1995 | Bridge Welding Code | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(2) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(1) | SAE Publication | 1970 | SAE Handbook | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 2001 | Water and Environmental Technology, Section 11.01 | ASTM International | |
| Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
| Food and Drug Administration | 21 CFR 101.83(c)(2)(ii)(A)(2) | UUSI Publication | 2000 | Determination of the Sterol Content in Margerines, Halvarines, Dressings, Fat Blends and Sterol Fatty Acid Ester Concentrates by Capillary Gas Chromatography | Unilever United States, Inc. | |
| Housing and Urban Development Department | 24 CFR 3285.312(b)(2)(ii) | SEI/ASCE 32 | 2001 | Design and Construction of Frost-Protected Shallow Foundations | Structual Engineering Institute/American Society of Civil Engineers | |
| Research and Special Programs Administration | 49 CFR 172.202(e) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
| National Archives and Records Administration | 36 CFR 1234.12(r) | NFPA 40 | 1997 | Standard for the Storage and Handling of Cellulose Nitrate Motion Picture Film | National Fire Protection Association |