This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 162.161-2(b)(1) | IMO MSC/Circ. 848 | 1998 | Revised Guidelines for The Approval of Equivalent Fixed Gas Fire-Extinguishing Systems, as Referred to in SOLAS 74, for Machinery Spaces and Cargo Pump-Rooms | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (26) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (1) Alkalinity | APHA Method 2320 B | 1995 | Alkalinity by Titration Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 55.14(e)(3)(ii)(E) | 40 CFR part 52, subpart F | 2000 | State of California, San Luis Obispo County Air Pollution Control District Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(ii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.890(a)(7) | ASTM D4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D4239 | 1985 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1953 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NMAB 353-3 | 1980 | Classification of Combustible Dust in Accordance with the National Electrical Code | National Academy Press | |
Research and Special Programs Administration | 46 CFR 111.30-5(a)(1) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (3) | USGS B-0025-85 | 1989 | Membrane Filtration Quantitative: Total Coliform | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.8) | EPA-600-4-79-019 | 1979 | Handbook of Analytical Quality Control in Water and Wastewater Laboratories | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(i) | ASTM D5500 | 1998 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 161.002-1(b) | ABS Publication | 1996 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D6357 | 2011 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-47 | ASHRAE Handbook | 1995 | HVAC Systems and Applications (RS-47) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 110.10-1(j) | Lloyd's Publication | 2002 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Nuclear Regulatory Commission | 10 CFR 52 App. B | DOE Publication | 1997 | Tier 1, Tier 2, and Generic Technical Specifications | General Electric Co. | |
Coast Guard | 46 CFR 160.055-3(h)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. SA-572-S10 | 1987 | Force sensing device | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Institute of Standards and Technology | 15 CFR 200.109(h) | NIST SP 250 | 2012 | Calibration and Related Measurement Services of the National Institute of Standards and Technology | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 571.5(k)(1) | NHTSA Drawing Package, NHTSA-213 | 2003 | NHTSA Standard Seat Assembly; FMVSS No. 213, (consisting of drawings and a bill of materials) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | EPA Method 505 | 1995 | Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography - Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Zinc) | APHA Method 3111 B | 1992 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.4751(c) | ASTM D1475 | 1990 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Coast Guard | 33 CFR 127.003(b) | ASME B31.3 | 1993 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(100) | ASTM D2584 | 1968 | Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.9.2(a) | ASTM E1136 | 2003 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 11 | 2014 | Foam Systems | National Fire Protection Association | |
Coast Guard | 33 CFR 155.1050(k)(2)(iv) | ASTM F1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (41) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA-600-4-75-008 (Revised) | 1976 | Interim Radiochemical Methodology for Drinking Water | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(5) | ASME B16.3 | 1998 | Malleable Iron Threaded Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61.18(c)(2) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Coast Guard | 46 CFR 62.50-30(k) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 111.60-3(b)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 195.3(c) D1 | MSS SP-75 | 2004 | Specification for High-Test Wrought Butt Welding Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C739 | 1991 | Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(8)(ii) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(31) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(c)(1)(v) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 2.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Coast Guard | 46 CFR 170.015(c)(1) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | APHA Method 4140 B | 1997 | Nitrate-nitrile (as N), CIE/UV | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | LI QuikChem Method 10-204-00-1-X | 2000 | Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis, Revision 2.2 | Lachat Instruments | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 26A, Section 7.1.2 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(18) | ASTM C330-05 | 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.135(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.903(o)(2) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | International Telecommunication Union--Telecommunication |