This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-4(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 229.51(a)(1) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.1 | 1971 | Chromium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.213 S6.3.1 | ASTM D 1564 | 1971 | Standard Method of Testing Flexible Cellular Materials--Slab Urethane Foam | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | 1971 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 13A | 1971 | Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(8) | SAE J-319b | 1971 | Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-166 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(ii) | ASTM D 93 | 1971 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5(h)(2) | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-236 | 1971 | Minimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(13) | ASTM D 484 | 1971 | Standard Specification for Hydrocarbon Drycleaning Solvents | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electrical Apparatus | American National Standards Institute | |
Federal Trade Commission | 16 CFR 460.5(a)(1) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.040-2(c) | MIL-R-45505 | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.1851(b)(1) | OKUIC regulations | 1971 | Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1 | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.171-3(b) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.1000(f)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(2) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.1730(a) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(B) | EPA Method 130.1 | 1971 | Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA | U.S. Environmental Protection Agency |