NOTE: This database has not been updated since August 16, 2016 and is being provided as a source for historical data. Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information may contain errors or be incomplete.
Use the CSV record export feature to download an export file of the data. The current search filters will be applied to the export. All pages of the current search result will be included in the export, not just the current page.
| Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|
| Coast Guard | 46 CFR 111.70-3(a) | IEC 92-201 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
| Coast Guard | 46 CFR 162.060-36 | ISO/IEC 17025:2005/Cor.1:2006(E) | General Requirements for the Competence of Testing and Calibration Laboratories, Technical Corrigendum 1 | International Organization for Standardization / International Electrotechnical Commission | |
| Coast Guard | 46 CFR 30.01-3(b)(1) | ASTM D 323 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | American Society for Testing and Materials | |
| Coast Guard | 46 CFR 56.01-2(l)(1) | SAE J-1475 | Surface Vehicle Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
| Coast Guard | 46 CFR 181.450(a)(1) | UL 217 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
| Coast Guard | 33 CFR 101.505(a) | IMO Conference Resolution 1 | SOLAS Chapter XI-2, Regulation 10 | International Maritime Organization | |
| Coast Guard | 46 CFR 111.60-1(a) | MIL-C-24643A | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
| Coast Guard | 46 CFR 56.15-1(e) | MSS SP-25 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
| Coast Guard | 46 CFR 164.120-5(d)(10) | ISO 2114:2000(E) | Plastics (polyester resins) and paints and varnishes (binders)—Determination of partial acid value and total acid value, Third Edition | International Organization for Standardization | |
| Coast Guard | 33 CFR 126.15(a)(9) | NFPA 307 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
| Coast Guard | 33 CFR 164.03(b) | ITU-R Recommendation M.1371-1 | Technical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access in the VHF Maritime Mobile Band | International Telecommunication Union Radiocommunication Bureau | |
| Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 12.10-7 | STCW Convention | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
| Coast Guard | 46 CFR 169.563(c) | UL 19 | Woven Jacketed, Rubber Lined Fire Hose | Underwriters Laboratories, Inc. | |
| Coast Guard | 40 CFR 444.12(b)(1) Table (3) | USGS I-3236-85 | Chromium by Flame Atomic Absorption | U.S. Geological Survey | |
| Coast Guard | 46 CFR 58.03-1(g)(5) | ASTM B 152 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | American Society for Testing and Materials | |
| Coast Guard | 46 CFR 132.130(n) | UL 19 | Fire hose | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 183.340(i) | UL 486A | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 56.30-20(d) | ASME B31.1 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 160.174-3(b) | ASTM D 975 | Standard Specification for Diesel Fuel Oils | American Society for Testing and Materials | |
| Coast Guard | 36 CFR 1235.4(e)(2) | ANSI X3.180 | Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording | American National Standards Institute | |
| Coast Guard | 46 CFR 53.01-1(c)(2) | UL 1453 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 56.65-1 | ASME B31.1 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
| Coast Guard | 33 CFR 127.003(b) | ASTM F 1121 | Standard Specification for International Shore Connections for Marine Fire Applications | American Society for Testing and Materials | |
| Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A5 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
| Coast Guard | 46 CFR 184.240(c)(2) | ABYC A-1 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
| Coast Guard | 46 CFR 170.270(c)(3) | ASTM F 1197 | Standard Specification for Sliding Watertight Door Control Systems | American Society for Testing and Materials | |
| Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
| Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | Standard Specification for Fuel Oils | American Society for Testing and Materials | |
| Coast Guard | 46 CFR 56.70-5(a) | ASME B&PV Code | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 57.04-1 | ASME B&PV Code | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
| Coast Guard | 81 FR 48295 | 46 CFR 169.236(a) | NFPA 306 | Control of Gas Hazards on Vessels | National Fire Protection Association |
| Coast Guard | 46 CFR 197.550(h) | ANSI Z88.2 | Respiratory Protection | American National Standards Institute | |
| Coast Guard | 21 CFR 172.340(b) | AOAC Official Methods | Official Methods of Analysis | AOAC International | |
| Coast Guard | 46 CFR 15.1103(c) | STCW Convention | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
| Coast Guard | 46 CFR 111.60-3(b)(3) | MIL-C-24643A | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
| Coast Guard | 46 CFR 125.180(b) | UL 486A | Wire Connectors and Soldering Lugs for Use with Copper Conductors | Underwriters Laboratories, Inc. | |
| Coast Guard | 33 CFR 154.812(a)(1) | NEMA Publication WD-6 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
| Coast Guard | 46 CFR 119.440(a)(2)(v) | UL 1102 | Non Integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 153.0(a)(1) | IMO Resolution MEPC 18(22) | IMO Standards for Procedures and Arrangements for the Discharge of Noxious Liquid Substances | International Maritime Organization | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B1.20.3 | Dryseal Pipe Threads (Inch) | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 160.010-3(a)(1) | IMO LSA Code | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
| Coast Guard | 46 CFR 56.01-2(e)(61) | ASTM B 234 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers | American Society for Testing and Materials | |
| Coast Guard | 46 CFR 160.151-21(g) | ISO 18813:2006(E) | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
| Coast Guard | 46 CFR 28.380(b) | ABYC P-1 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
| Coast Guard | 46 CFR 160.055-5(b)(1) | Drawing No. 160.055-1A, Sheet 1 | Life Preservers, Unicellular Plastic Foam, Adult, Construction and Arrangement, Vinyl Dip Coated, Model 62, Adult | U.S. Coast Guard | |
| Coast Guard | 46 CFR 62.50-30(c) | ABS Publication ASTM B 96 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
| Coast Guard | 46 CFR 28.345(b) | ABYC E-1 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
| Coast Guard | 46 CFR 185.604(f) | IMO Resolution A.760(18) | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
| Coast Guard | 33 CFR 142.42(b) | ANSI A10.14 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute |