This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 91.15-1 | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(5)(ii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(18) | ASTM A 226/A 226M | 1995 | Standard Specification for Electric Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service | ASTM International | |
Coast Guard | 46 CFR 32.57-10(d)(7–a) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Coast Guard | 33 CFR 126.15(a)(2) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 110.10-1(o)(17) | UL 1598 | 2000 | Luminaires | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 125.180(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 177.1350(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Coast Guard | 46 CFR 116.440(d)(2) | NFPA 92B | 1995 | Smoke Management Systems in Malls, Atria, and Large Areas | National Fire Protection Association | |
Coast Guard | 46 CFR 148.205(b)(1) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 153.4(b) | ASTM F 1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Coast Guard | 46 CFR 160.176-4(b)(2) | Federal Standard 191A | 1978 | Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.005-4(c)(1) | Drawing No. 160.005-1 (Sheet 5) | 2012 | Pad Detail (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-H-2846 | 1965 | Hooks, Fish, Steel | U.S. Department of Defense | |
Coast Guard | 46 CFR 54.25-15(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.055-3(h) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 109.563(a)(6) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Coast Guard | 46 CFR 160.077-19(d)(2) | Federal Standard 191 | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-2 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 2: Pressurized Enclosures “p”, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.132-3 | IMO LSA Code | 2010 | International Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 33 CFR 96.370(a)(2) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Coast Guard | 46 CFR 111.105-37 | NFPA 99 | 2005 | Standard for Health Care Facilities | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-5(f)(3) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.151-21(u) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.151-17 | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(h)(2) | UL 1185 | 1996 | Standard for Safety for Portable Marine Fuel Tanks, Fourth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 12.03-1(a)(8) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 177.300(d)(1)(i) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.170-7(b)(3) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-5(d)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 116.300(b)(1)(ii) | ABS Publication | 1975 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
Coast Guard | 46 CFR 162.161-2(d)(2) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 61.20-17(a) | ASTM D 665 | 1998 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water | ASTM International | |
Coast Guard | 46 CFR 153.930 | IMO Publication | 1976 | Medical First Aid Guide for Use in Accidents Involving Dangerous Goods | International Maritime Organization | |
Coast Guard | 33 CFR 104.400(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 46 CFR 110.10-1(b)(2) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 15.1109 | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(e)(3) | MIL-R-24719(SH) | 1989 | Military Specification, Resins, Vinyl Ester, Low Pressure Laminating | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.105-1 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 116.423(b) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 170.248(d) | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended (IMO Res. MSC.216(82) | International Maritime Organization | |
Coast Guard | 46 CFR 53.01-3(b) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.75-20(a) | IEC 92-306 | 1980 | Electrical Installation in Ships, Part 306: Equipment-Luminaries and accessories, Third Edition | International Electrotechnical Commission | |
Coast Guard | 7 CFR 1755.505(f)(6) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(10) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers |