This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 114.600(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(a)(6) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(v) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.027-1(b) | ASTM F 1546 | 2012 | Standard Specification for Firehose Nozzles | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.144(b)(1) | Drawing No. SA-572-S50 | 1994 | Chest Deflection Transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 1 | 1990 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines | American Gas Association | |
Food and Drug Administration | 21 CFR 178.3620(d)(1)(i) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(iv) | NFPA 1982 | 1998 | Standard on Personal Alert Safety Systems (PASS) | National Fire Protection Association | |
Coast Guard | 33 CFR 96.370(a)(2) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.20 | 1998 | Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Energy Department | 10 CFR 431.15(e)(2)(vi) | ISO/IEC Guide 65 | 1993 | General requirements for bodies operating product certification systems | International Organization for Standardization / International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 184.1061(b) | Food Chemicals Codex | 1981 | Lactic Acid | National Academy Press | |
Coast Guard | 46 CFR 147.7(e)(1) | DHHS 84-2024 | 1984 | The Ship's Medicine Chest and Medical Aid at Sea | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.156-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(ii) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Amperometric Titration) | ASTM D 1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(75) | ASTM D 6350 | 1998 | Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 62.16015(e)(1)(i) | ANSI/ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(4)(ii) | ANSI A13.1 | 1956 | Scheme for Identification of Piping Systems | American National Standards Institute | |
National Highway Traffic Safety Administration | 30 CFR 56.13030(d) | NB-23 | 1979 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-69 | 1996 | Pipe Hangers and Supports -- Selection and Application | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(i) | ASTM C 1166 | 2000 | Standard Test Method for Flame Propagation of Defense and Cellular Elastomeric Gaskets and Accessories | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(p)(5)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.2M | 1990 | Vitreous China Plumbing Fixtures | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 46 CFR 161.006-1(a)(3) | ASTM B 456 | 1995 | Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International | |
Interior Department | 43 CFR 11, Appendix II | DOI NRDAM/CME | 1996 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.338-2(c) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1728.97(e)(5) | AWPA A6 | 2001 | Method for the Determination of Oil-Type Preservatives and Water in Wood | American Wood Protection Association | |
Energy Department | 10 CFR 431.19(c)(4) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Animal and Plant Health Inspection Service | 7 CFR 353.9(b)(2) | USDA Reference Manual B | 2001 | Seed Health Testing and Phytosanitary Field Inspection Methods | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 147.67(c) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4013 | 1987 | Knee machined | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(11) | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 184.1343(b) | Food Chemicals Codex | 1981 | Locust (carob) bean gum | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(11) | SAE J-1318 | 1998 | Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 8 | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxiv) | ASTM D 1691 | 2007 | Standard Test Methods for Zinc in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | ISO 10708:1997(E) | 1997 | Water Quality—Evaluation in an Aqueous Medium of the Ultimate Aerobic Biodegradability of Organic Compounds—Determination of Biochemical Oxygen Demand in a Two-Phase Closed Bottle Test. First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 67 | Orion Method AQ4500 | 2009 | Determination of Turbidity by Nephelometry. Revision 5 | Thermo Scientific | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Naled) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart EE | NHHWMP | 2014 | State of New Hampshire Hazardous Waste Management Program (Reserved) | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 75.6(b)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.60-11(c) | UL 44 | 1999 | Standard for Thermoset-Insulated Wire and Cable, Fifteenth Edition, Mar. 22, 1999 (Revisions through and including May 13, 2002) | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 154.106(d)(4) | ASTM F 1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Coast Guard | 46 CFR 52.01-110(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers |