DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Communications Commission | 47 CFR 80.1101(c)(8) | IMO Resolution A.808(19) | 1995 | Performance Standards for Ship Earth Stations Capable of Two-Way Communications | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 55.14(d)(5)(i) | 40 CFR part 52, subpart I | 2008 | State of Delaware Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 86 | 2001 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 10.107(b) STCW endorsement | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.522(k)(2)(vii) | Bellcore TR-TSY-000508 | 1987 | Automatic Message Accounting, Section 8.1, Issue 2 | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 136.3(b)(22)(i) | ENH Journal of Chromatography | 1970 | Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography | Elsevier/North-Holland, Inc. | |
Federal Reserve System | 12 CFR 1511.1 Revised Article 8 | Uniform Commercial Code | 1994 | Revised Article 8, Investment Securities, (with Conforming and Miscellaneous Amendments to Articles 1,3,4,5,9, and 10) | National Conference of Commissioners on Uniform State Laws | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.336(b) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 173.65(b) | FDA Publication | 0 | Determination of Divinylbenzene in Alcohol Extracts in Amerlite XAD-4 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 61.18(d)(1)(iv) | EPA Method 8260 | 1987 | Gas Chromatography/Mass Spectrometry for Volatile Organics: Capillary Column Technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(8) | ASTM D 1250 | 2007 | Standard Guide for Petroleum Measurement Tables | ASTM International | |
Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ASTM D 695 | 2008 | Standard Test Method for Compressive Properties of Rigid Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(ii) | ASTM D 5598 | 2012 | Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling | ASTM International | |
Coast Guard | 46 CFR 160.132-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(iv) | Drawing No. 175-3000 | 2009 | Shoulder Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(i) | EPA-600-R-93-100 | 1993 | Methods for the Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA Method 1674 | 0 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.405(c) | NWWDA I.S. 4 | 1981 | Industry Standard for Water-Repellent Preservative Non-Pressure Treatment of Millwork | National Wood Window and Door Association | |
Environmental Protection Agency | 40 CFR 147.200(a)(2) | ARUIC regulations | 1981 | Act 105 of 1939, Arkansas Statutes Annotated sections 53-101 through 53-130 (1971 and Supp. 1981); Act 937 of 1979, Arkansas Statutes Annotated sections 53-1301 through 53-1320 (Supp. 1981); Act 523 of 1981 | State of Arkansas | |
Environmental Protection Agency | 40 CFR 63.5758(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.6 | ASTM D 1217 | 1993 | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer | ASTM International | |
Coast Guard | 46 CFR 111.50-3(c) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Research and Special Programs Administration | 42 CFR 460.72(b)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 178.1010(c)(40) | BII Publication | 1987 | Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm Available ClO2) | Bio-cide International, Inc. | |
Environmental Protection Agency | 40 CFR 98.7(m)(8) | EPA Publication | 2008 | Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(iv) | EPA-600-4-91-010 | 1991 | Methods for the Determination of Metals in Environmental Samples | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 347 | 1978 | Recommended Practice for Concrete Formwork | American Concrete Institute | |
Mine Safety and Health Administration | 30 CFR 75.333(d)(1) | ASTM E 162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Research and Special Programs Administration | 49 CFR 172.102(c)(3) B13c | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Food and Drug Administration | 21 CFR 172.841(b) | Food Chemicals Codex | 2004 | Polydextrose | National Academy Press | |
Environmental Protection Agency | 40 CFR 63.14(g)(80) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Grain Inspection, Packers and Stockyards Administration | 7 CFR 801.7(a)(2) | CRA Method A-20 | 1986 | Analysis for Starch in Corn | Corn Refiners Association | |
Veterans Affairs Department | 38 CFR 39.63 | IAPMO Publication | 2003 | Uniform Plumbing Code | International Association of Plumbing and Mechanical Officials | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (1) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(b)(2) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(B) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12F | 1961 | Specification for Small Welded Production Tanks, Fifth Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (50) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4107 | 1991 | Standard Test Method for Tritium in Drinking Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 2005 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.292 (j) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 131.203(e)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.048-1(a)(2) | FedSpec L-P-375C | 0 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7470 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA SW-846 Third Edition | U.S. Environmental Protection Agency |