DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1755.390(i)(10) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 3246 | 0 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulemetry | ASTM International | |
Energy Department | 10 CFR 430.3(n)(1) | OSA Publication | 1968 | Computation of Correlated Color Temperature and Distribution Temperature, A.R. Robertson, Journal of the Optical Society of America, Volume 58, Number 11, November 1968, pages 1528-1535 | Optical Society of America | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Food and Drug Administration | 21 CFR 177.1320(c)(1)(iii) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Mine Safety and Health Administration | 40 CFR 1065.715 Table 1 Note 1 | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 21 CFR 145.145(a)(3)(iii) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(59) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Food and Drug Administration | 21 CFR 172.864(b)(2) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 162.161-3(c)(2) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.6(b)(4)(v) | EPA Method 1638 | 1996 | Determination of Trace Elements in Ambient Waters by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1720 | 2001 | Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AAMA 101 | 1988 | Voluntary Specifications for Aluminum Prime Windows and Sliding Glass Doors | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.107(d)(1) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(iii) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Propazine) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.86(d)(1)(i)(B) | OKUSTP | 1995 | Oklahoma Regulatory Requirements Applicable to the Underground Storage Tank Program | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.4.2 | ASTM D 4057 | 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/APA 1 | 1984 | Mosaic-Parquet Hardboard Slat Flooring | APA--The Engineered Wood Association | |
Coast Guard | 24 CFR 3280.803(k)(3)(ii) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart MM | ORSIP | 1979 | State of Oregon Implementation Plan with Regulatory and Nonregulatory Revisions | State of Oregon | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, II | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.174-17(g) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 61.245(e)(3) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 33 CFR 157.02(b)(7) | IMO Resolution A.744(18) | 1993 | Guidelines on the Enhanced Programme of Inspections During Surveys of Bulk Carriers and Oil Tankers, Annex B sections 1.1.3-1.1.4, 1.2-1.3, 2.1, 2.3-2.6, 3-8, and Annexes 1-10 with appendices | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(c)(3) | Drawing No. 160.055-1B, Sheet 1 | 0 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 63, Adult | U.S. Coast Guard | |
Food Safety and Inspection Service | 21 CFR 165.110(b)(4)(iii)(I)(4)(i) | EPA-600-R-95-131 | 1995 | Method 502.2--Volatile Organic Compounds in Water by Purge and Trap Capillary Column Gas Chromatography with Photoionization and Electrolytic Conductivity Detectors in Series | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.933(a) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(s)(2) | NIOSH Publication | 1976 | Development of Criteria for Fire Fighters Gloves: Vol. II, Part II, Test Methods | National Institute for Occupational Safety and Health | |
Public Health Service | 42 CFR 37.10(b)(4) | AAPM Report No. 74 | 2002 | Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(5) | ASTM B 117 | 2003 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | APHA Method 3111 B | 1992 | Metals by Flame Atomic Absorption | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(22) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electric Apparatus | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (29) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Pentachlorophenol) | EPA Method 515.3 | 0 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Extraction, Derivitization, and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(a)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Federal Highway Administration | 23 CFR 650.211(b) | AASHTO Publication | 1991 | Model Drainage Manual | American Association of State Highway and Transportation Officials | |
Research and Special Programs Administration | 46 CFR 111.105-3 | IEEE 45 | 1998 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.6.3 | EPA-454-R-98-004 | 0 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 90.204(e) | MSHA Informational Report IR 1240 | 1966 | Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers | Mine Safety and Health Administration, U.S. Department of Labor | |
Mine Safety and Health Administration | 30 CFR 56.2 Potable water | 40 CFR 141 | 1974 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Rural Utilities Service | 7 CFR 1755.702(f)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315 Table Note 3 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-6 | 1969 | Airport Design Standards--General Aviation Airports--Basic and General Transport | Federal Aviation Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(b) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute |