Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 141.25(a) Table Note 8 | DOE HASL-300 | 1990 | DOE EML Procedures Manual, 27th Edition, Volume 2 | U.S. Department of Energy | |
| Environmental Protection Agency | 40 CFR 60.107a(d)(7)(iv) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
| Energy Department | 10 CFR 430.2, Definitions, Colored fluorescent lamp (1) | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
| Energy Department | 10 CFR 430.2, Definitions, Colored incandescent lamp (1) | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
| Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
| Environmental Protection Agency | 40 CFR 1042.501(g) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
| Housing and Urban Development Department | 24 CFR 3280.4(a) | TPI All Standards | 0 | All specifications, standards and codes without specific reference | Truss Plate Institute | |
| Rural Utilities Service | 7 CFR 1755.890(k)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
| Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D 1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
| Environmental Protection Agency | 40 CFR 58 Appendix G, 13 | EPA-454-B-02-002 | 2002 | Data Quality Objectives (DQOs) For Relating Federal Reference Method (FRM) and Continuous PM 2.5 Measurements to Report an Air Quality Index (AQI), Eberly, S., T. Fitz-Simons, T. Hanley, et al. | U.S. Environmental Protection Agency | |
| Occupational Safety and Health Administration | 29 CFR 1910.145(d)(4) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 98.324(e)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
| National Highway Traffic Safety Administration | 46 CFR 25.45-2(b)(4) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
| Commodity Credit Corporation | 7 CFR 1427.5(b)(10) | NCCA Publication | 1995 | Specifications for Cotton Bale Packaging Material | National Cotton Council of America | |
| Energy Department | 10 CFR 431.134(b) | ASHRAE 29 | 2005 | Methods of Testing Automatic Ice Makers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
| Rural Utilities Service | 7 CFR 1728.97(a)(12) | RUS Bulletin 50–40 (D–14) | 1951 | RUS Specification for Pole Top Brackets for Channel Type Pins | Rural Utilities Service, U.S. Department of Agriculture | |
| Occupational Safety and Health Administration | 29 CFR 1926.603(a)(2) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Mine Safety and Health Administration | 30 CFR 57.6133(b) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
| Coast Guard | 46 CFR 164.018-5(a)(3) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
| Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 5186 | 1999 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN C | 1995 | Cyanide, Total After Distillation | American Public Health Association | |
| Energy Department | 10 CFR 440 Appendix A | ASTM C 665 | 1988 | Blanket Mineral Fiber Insulation | ASTM International | |
| Coast Guard | 46 CFR 114.600(b) | NFPA 701 | 1996 | Fire Tests For Flame-Resistant Textiles and Films | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 572.36(f) | Drawing No. 78051-218 | 0 | Hybrid III Anthropomorphic Test Dummy, Revision T | General Motors Corporation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
| Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2006.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Silverside, Menidia beryllina, Menidia menidia, and Menidia peninsulae, acute | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 22 | Enterolert® Method | 2002 | 24-hour detection of enterococci | IDEXX Laboratories | |
| Environmental Protection Agency | 40 CFR 435.41(r) | MARPOL 73/78 | 0 | Annexes to MARPOL 73/78 | Lloyd's Register of Shipping | |
| Environmental Protection Agency | 40 CFR 86.1(b)(4) | ASTM D 445 | 2012 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) | ASTM International | |
| Food and Drug Administration | 21 CFR 184.1979a(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.7 | 1997 | Prefabricated Plastic Spa Shells | American National Standards Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
| National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.4 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
| Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 1266 | 1998 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
| Environmental Protection Agency | 40 CFR 147.1900(b)(1) | ORUIC regulations | 0 | Oregon Revised Statutes, Chapter 183 (1987); 192.420, 192.500, 459.460(3), 468.005 through 468.605, and 468.780 through 468.997; Chapters 516 and 522 (1983) | State of Oregon | |
| Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 2, (4)(c) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
| Research and Special Programs Administration | 49 CFR 178.68(l)(2) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
| Environmental Protection Agency | 40 CFR 63.14(g)(53) | ASTM D 4256 | 1989 | Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
| Coast Guard | 46 CFR 56.01-2(d)(16) | ASME B16.23 | 2002 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.31e Standard Metropolitan Statistical Area | OMB Bulletin No. 93–17 | 1993 | Revised Statistical Definitions for Metropolitan Areas | Executive Office of the President, Office of Management and Budget | |
| Food and Drug Administration | 21 CFR 173.340(a)(4) | Union Carbide Publication | 1995 | Viscosity Determination of n-butoxypoly (oxyethylene) poly (oxypropylene) glycol | Union Carbide Corporation | |
| National Highway Traffic Safety Administration | 49 CFR 571.209 S5.1(e) | ASTM G 23 | 1981 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.1 | 1998 | Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250 | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | EPA Method 267.2 | 1978 | Ruthenium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
| Coast Guard | 21 CFR 161.173(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Environmental Protection Agency | 40 CFR 141.40(c)(3) | APHA Standard Methods, 21th Edition | 2005 | Standard Methods for the Examination of Water and Wastewater. 21th Edition | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.4 | APHA Method 601 | 0 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
| Energy Department | 10 CFR 440 Appendix A | ASTM C 592 | 1980 | Blanket Insulation and Blanket Type Pipe Insulation (Metal-mesh Covered) (Industrial Type) | ASTM International | |
| Coast Guard | 33 CFR 127.201(c)(2) | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association |