This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.17(g)(77) | ASTM D 1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 92041-005 | 1992 | Threaded Pin | Reprographic Technologies | |
Food and Drug Administration | 40 CFR 1065.190(b) | ISO 14644 | 1999 | Cleanrooms and associated controlled environments | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Turbidity) | EPA Method 180.1 | 1993 | Determination of Turbidity by Nephelometry, Revision 2.0 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(34) | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Coast Guard | 46 CFR 56.60-25(b)(6) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | ASTM D 515A | 1988 | Test Methods for Phosphorus in Water (Withdrawn 1997) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.701 Table 1 | ASTM D 910 | 2013 | Standard Specification for Aviation Gasolines | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(8)(iv) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(ii) | AOAC Official Methods | 1975 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.176-13(y)(3) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c) | IMO Resolution MSC.295(87) | 1996 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, I | ASTM D 2513 | 1999 | Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.351(c)(2) | 49 CFR part 192 | 2014 | Minimum Federal Safety Standards for Gas Pipelines | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(1) | EPA-560-5-85-024 | 1985 | Guidelines for Controlling Asbestos-Containing Materials in Buildings | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 139 | 1996 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(xi) | EPA Method 0040 | 1996 | Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D 3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(2)(ii) | 30 CFR 211 | 2014 | Coal-Mining Operating and Safety Regulations | Bureau of Mines, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F C | 1995 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 258.41(a)(4)(iii)(A) | ASTM D 2216 | 1998 | Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-9076 | 1994 | Test Method for Total Chlorine in New and Used Petroleum Products by Oxidative Combustion and Microcoulometry, Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(N) | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.277(b)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Rural Utilities Service | 33 CFR 154, Appendix A, 3.3.2 | MSC Circular 373 | 1988 | Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 109.105(b) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.14(c)(2) | AOAC Method 929.02 | 1995 | Preparation of Fertilizer Sample, Sixteenth edition | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (n-Butyl-acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.75(g)(2) | FMVSS 119 | 1998 | New Pneumatic Tires for Vehicles Other Than Passenger Cars | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 33 CFR 101.310(a) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 6 | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5630 | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 430 Subpart B, App. X, 4 | EPA Publication | 2001 | ENERGY STAR Program Requirements for Dehumidifiers | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.055-1(a)(5) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(ii) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(a)(iv) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.262(w)(1) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (87) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 62.05-1(b) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Occupational Safety and Health Administration | 29 CFR 1910.6(l)(1) | CMAA Specification 1B61 | 2013 | Specification for Electric Overhead Traveling Cranes | Crane Manufacturer's Association of America | |
Food and Drug Administration | 21 CFR 573.460(a)(1)(i) | AAFCO Publication | 2003 | Official Publication | Association of American Feed Control Officials, Inc. | |
Environmental Protection Agency | 40 CFR 63.14(g)(55) | ASTM D 4606 | 2003 | Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (16) | USGS I-1184-85 | 1985 | Chloride, mercurimetric | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(1)(v) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 D | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association |