DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 80 | 2000 | Guide for Safety in AC Substation Grounding | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 223 | 1991 | Standard Specification for Asbestos-Cement Siding | ASTM International | |
Coast Guard | 46 CFR 113.30-25(i) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S12.6 | UNECE Regulation 48 | 1996 | Uniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light-Signaling Devices | United Nations Economic Commission for Europe | |
Rural Utilities Service | 7 CFR 1755.903(o)(1)(i) | ICEA S-87-640 | 0 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(d) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.303(b)(1) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | GPA 2172 | 1996 | Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis | Gas Processors Association | |
Research and Special Programs Administration | 49 CFR 178.59(l)(1)(v) | CGA C-12 | 1994 | Qualification Procedure for Acetylene Cylinder Design | Compressed Gas Association | |
Rural Utilities Service | 7 CFR 1728.202(b)(2) | AWPA M3 | 2005 | Standard Quality Control Procedures for Wood Preserving Plants | American Wood Protection Association | |
Energy Department | 10 CFR 430.3(e)(1) | ASHRAE 16 | 2009 | Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1755.200(e)(17) | RUS Bulletin 345-63 | 0 | RUS Specification for Acceptance Tests and Measurements of Telephone Plant, PC–4 | Rural Utilities Service, U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Coast Guard | 46 CFR 54.25-10(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(25) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i)(A) | 29 CFR 1910.107(b)(10) | 0 | Spray finishing using flammable and combustible materials; Spray booths | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 164.015-4(h)(1) | Federal Standard 601 | 0 | Rubber, Sampling and Testing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Foaming agents) | APHA Method 5540 C | 1998 | Surfactants, Anionic Surfactants as MBAS | American Public Health Association | |
Food and Drug Administration | 21 CFR 73.160(b) | Food Chemicals Codex | 1981 | Ferrous Gluconate | National Academy Press | |
Coast Guard | 46 CFR 160.060-5(b) | Drawing No. 160.060-1, Sheet 3 | 0 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CYS | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-383X | 2011 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as Aroclors)) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.105a(g)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Technology Administration | 15 CFR 1150.1(b) | ASTM F 589 | 1985 | Standard Consumer Safety Specification for Non-Powder Guns | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.100 | 0 | Explosives | U.S. Department of Transportation | |
Coast Guard | 21 CFR 156.3(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 1(b) | EPA-454-R-98-004 | 0 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429f | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(ii) | SAE J-1939-11 | 1999 | Physical Layer--250K bits/s, Shielded Twisted Pair | Society of Automotive Engineers | |
Energy Department | 10 CFR 430.2, Definitions, Rated wattage (1)(i) | ANSI C78.81 | 2005 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (4) | ASTM 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.97(b)(10) | RUS Bulletin 345-180, Form 397a | 1963 | Specification for Voice Frequency Repeaters and Voice Frequency Repeater Trunks | Rural Utilities Service, U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.228(b) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.207(a)(4) | IITRI J-6461 | 1979 | Development of Mobile Home Fire Test Methods to Judge the Fire-Safe Performance of Foam Plastic Sheathing and Cavity Insulation | IIT Research Institute | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(F) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(30) | ASTM E 274 | 1970 | Standard Method of Test for Skid Resistance of Paved Surfaces Using a Full-Scale Tire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.8 | 0 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 430.3(k)(2) | IES LM-9 | 1999 | Electrical and Photometric Measurements of Fluorescent Lamps | Illuminating Engineering Society of North America | |
Occupational Safety and Health Administration | 29 CFR 1926.6(v)(1) | FedSpec QQ-P-416 | 0 | Federal Specification Plating Cadmium (Electrodeposited) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (33) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(E) | EPA Method 245.1 | 1994 | Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 0 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.613(e)(3)(iii)(C) | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 410.1 | ASME A18.1 | 1999 | Safety Standard for Platform Lifts and Stairway Chairlifts, including A18.1a-2001 and ASME A18.1b-2001 Addenda | American Society of Mechanical Engineers | |
Coast Guard | 24 CFR 3280.808(m) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart Q | IASIP | 1979 | State of Iowa Implementation Plan with Regulatory and Nonregulatory Revisions | State of Iowa |