This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(ix) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 39 | OIA Method PAI-DK01 | 1994 | Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Tritrimetric Detection) | OI Analytical | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(B) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section B Total Coliform Methods, 2.6.2 Two-Step Enrichment Procedure, page 111 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430.01(v) | EPA Method 1653 | 2014 | Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(p)(3)(ii) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.26 | 1988 | Cast Copper Alloy Fittings for Flared Copper Tubes | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.115-5(b)(5) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(10) | Drawing No. SA-572-S42 | 1996 | Tilt sensors | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63.4941(c) | ASTM D 1475 | 1990 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | AWS D1.1 | 1973 | Structural Welding Code--Steel | American Welding Society | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NSPI 1 | 1991 | Standard for Public Swimming Pools | National Spa and Pool Institute | |
Mine Safety and Health Administration | 30 CFR 56.6133(b) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 113.40-10(b) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code) | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 193.2059(a) | GRI-89/0242 | 1990 | LNG Vapor Dispersion Prediction with DEGADIS Dense Gas Dispersion Model | Gas Research Institute | |
Coast Guard | 46 CFR 56.01-2(d)(22) | ASME B16.42 | 1998 | Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(b)(3) Table | ISO/IEC 16382 | 2000 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 147.2750 | ASUIC regulations | 2014 | State-administered program (Reserved) | American Samoa Territory | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 557 | 1984 | Standard Specification for Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products | ASTM International | |
Coast Guard | 46 CFR 182.440(d) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.41 Coal | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 17.74(p)(3)(i) | NFPA 13R | 2010 | Installation of Sprinkler Systems in Residential Occupancies Up To and Including Four Stories in Height | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(m)(2) | UNECE Regulation 48 | 1996 | Uniform Provisions Concerning the Approval of Vehicles With Regard to the Installation of Lighting and Light-Signaling Devices, E/ECE/324-E/ECE/TRANS/505, Rev.1/Add.47/Rev.1/Corr.2 | United Nations Economic Commission for Europe | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (44) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 3972 | 1997 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 5453 | 2000 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(d)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(3) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (48) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 11.1.1 | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 23 CFR 650.807(c) | COMDT INST M16590.5 | 1983 | USCG/FHWA Procedures for Handling Projects which Require a USCG Permit | U.S. Coast Guard | |
Coast Guard | 33 CFR 127.611 | ASTM F 1121 | 1993 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Federal Communications Commission | 47 CFR 15.120(d)(2) | CEA 766-A | 2001 | U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information using ATSC A/65-A Program and System Information Protocol (PSIP) | Consumer Technology Association | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(iii) | ASTM D 1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-45 | 1973 | Lightweight Approach Light Structure | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | ASTM D 6508 | 2000 | Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte, Revision 2 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i) | ANSI H38.7 | 1969 | Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube | American National Standards Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (8) | ASTM D 3645B | 2003 | Beryllium by Graphite Furnace Atomic Absorption | ASTM International | |
Coast Guard | 46 CFR 183.410(d) | UL 1573 | 1995 | Stage and Studio Lighting Units | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.485(g)(6) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 264.1063(d)(1) | ASTM E 169 | 1987 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Federal Highway Administration | 23 CFR 645.211 | AASHTO Publication | 2014 | Roadside Design Guide | American Association of State Highway and Transportation Officials | |
Coast Guard | 46 CFR 52.01-120(a)(4) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | ASTM D 7573 | 2009 | Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(V) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | ASTM D 4190 | 1982 | Metals by Direct Current Plasma | ASTM International |