DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(7)(ix) | EPA-821-R-02-013 | 2002 | Short-Term Methods for Measuring the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, Fourth Edition | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5320-12 | 1975 | Methods for the Design, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 174.360 | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 12A | 0 | Halon 1301 Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 161.010-1(b) | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 178.3780(b)(1) | Fisher Johns Method 18 | 0 | Semimiero Qualitative Organic Analysis, The Systematic Identification of Organic Compounds 2nd Edition | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.026-6(a) | 46 CFR 159.010 | 0 | Independent Laboratory: Acceptance, Recognition, and Termination | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.133-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(b) | Drawing No. 175-0000, Sheet 3 of 6 | 2009 | Exterior dimensions of ES-2re test dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(J) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 0 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(7)(v)(B) | ASTM D 4444 | 0 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1750(a)(2) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 162 | 0 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) Table H-24 Footnote 1 | ASTM B 88 | 1969 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Patent and Trademark Office | 30 CFR 57.6201(a)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Coast Guard | 33 CFR 164.43(b)(2) | RTCM Paper 194-93/SC 104-STF | 1994 | Recommended Standards for Differential NAVSTAR GPS Service | Radio Technical Commission for Maritime Services | |
Coast Guard | 46 CFR 197.204, ANSI Code1 | ANSI B31.1 | 0 | Code for Pressure Piping | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.1107-16(b) | NFPA 17 | 1969 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 111.60-1(a) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 193.2321 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 178.3610(a) | FDA Publication | 1977 | Determination of Unsaturation of Resin | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix D, Table 4 | ASTM D 86 | 1997 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 110.10-1(l)(4) | NFPA 496 | 2003 | Standard for Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.16(a) | Drawing No. SA 103C 001 | 1976 | Operation and Maintenance Manual for 3-year-old Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (54) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.120(a)(4) | ISO 2592 | 1973 | Petroleum Products--Determination of Flash and Fire Points--Cleveland Open Cup Method | International Organization for Standardization | |
Coast Guard | 21 CFR 172.810 | Food Chemicals Codex | 1981 | Dioctyl Sodium Sulfosuccinate | National Academy Press | |
Environmental Protection Agency | 40 CFR 63.14(n)(5) | NCASI Method ISS/FP-A105.01 | 2005 | Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
National Oceanic and Atmospheric Administration | 50 CFR 226.205 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Idaho | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(12) | ANSI B30.5, 5-1.9.1(f) | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Booms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (vanadium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5220(b)(5)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(E)(2) | ASME Code Case N-722 | 2005 | Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated with Alloy 66/82/182 Materials, Section XI, Division 1 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7210 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1503 | ACGIH Guidelines | Industrial Ventilation: A Manual of Recommended Practice | American Conference of Governmental Industrial Hygienists | ||
Food and Drug Administration | 16 CFR 1201.4(b)(3)(ii) | ASTM D 2565 | 1970 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b)(4) | Federal Standard 191 | 0 | Method 5804.1, Weathering Resistance of Cloth: Accelerated Weathering Method | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | SMACCNA Publication | 1978 | Energy Recovery Equipment and Systems, Air-to-Air | Sheet Metal and Air Conditioning Contractors' National Association | |
Coast Guard | 46 CFR 39.2009(a)(3) | ASTM F 1271 | 1989 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Z | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.870(b)(1) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xiii) | EPA Method 1680 | 2010 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium | U.S. Environmental Protection Agency | |
Drug Enforcement Administration | 21 CFR 1311.55(b)(3) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 54.01-5(g) Table 54.01-5(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ISI Method 1002-8 | 2009 | Dissolved Oxygen (DO) Measurement by Optical Probe | In-Situ Incorporated |