This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 52.01(g) | ASTM D 240 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 113.25-11(a) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(x) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-9M | 1988 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.926d(c)(4) | 44 CFR 60 | 2013 | National Flood Insurance Program | Federal Emergency Management Agency | |
Coast Guard | 46 CFR 160.077-21(c)(5)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(5) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 13 | APHA Method 9221 B | 2006 | Multiple Tube Fermentation Qualitative (LTB): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.6) | ACS Publication | 1979 | Safety in Academic Chemistry Laboratories | American Chemical Society | |
Environmental Protection Agency | 40 CFR 80.47(m)(13)(i)(A) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.219(c)(5)(iii) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.4 | GPA 2172 | 1996 | Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis | Gas Processors Association | |
Environmental Protection Agency | 40 CFR 63, Subpart IIII, Appendix A, Section 2.1 | EPA-450-3-88-018 | 1988 | Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diazinon) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(22) | ANSI Z88.5 | 2014 | Practice for Respiratory Protection for the Fire Service | American National Standards Institute | |
Coast Guard | 21 CFR 178.3910(a)(4)(i)(A) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1616.5(c)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 40 CFR 58 Appendix A, 6.0 (2) | EPA-240-B-01-002 | 2001 | EPA Requirements for Quality Management Plans, EPA QA/R-2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.324(e)(4) | ASME MFC-7M | 1992 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(g)(8) | ASTM D 93 | 1997 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(36) | SAE J-944 | 1980 | Steering Control System—Passenger Car—Laboratory Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147, Subpart BB, Appendix A(b) | MTUIC regulations | 1996 | Administrative Rules of Montana Board of Oil and Gas Conservation, Chapter 22 | State of Montana | |
Environmental Protection Agency | 40 CFR 761.60(g)(1)(ii) | ASTM D 923 | 1986 | Standard Practices for Sampling Electrical Insulating Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(166) | ASTM D 4810 | 1999 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(u)(1) | DOT Publication | 1993 | MUTCD Part VI, Standards and Guides for Traffic Controls for Street and Highway Construction, Maintenance, Utility, and Incident Management Operation | U.S. Department of Transportation | |
Veterans Affairs Department | 38 CFR 17.63(a)(4)(ii) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 3125 | 2009 | Metals by Inductively Coupled Plasma/Mass Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4414(a)(1)(i) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(7) | ANSI/NFPA 231C | 2014 | Standard for Rack Storage of Materials | National Fire Protection Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(ii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Rural Utilities Service | 7 CFR 1755.703(d) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 52, Subpart RR | TNSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Tennessee | |
Food and Drug Administration | 21 CFR 177.2450(b)(2) | FDA Publication | 1989 | Solution Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.1 | ICC/IBC | 2001 | International Building Code | International Code Council | |
Coast Guard | 33 CFR 154, Appendix B, 3.2 | ANSI B16.5 | 1979 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, I | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Federal Aviation Administration | 14 CFR 91 Appendix A 3(a)(1) | RTCA Paper 23-63/DO-117 | 1963 | Standard Adjustment Criteria for Airborne Localizer and Glide Slope Receivers | Radio Technical Commission for Aeronautics | |
Minerals Management Service | 30 CFR 250.802(d) | API RP 14H | 2007 | Recommended Practice for the Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(v) | APHA Standard Methods, 19th Edition | 1995 | Standard Methods for the Examination of Water and Wastewater. 19th Edition | American Public Health Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-27A | 1969 | Specification for L-807 Eight-foot and Twelve-foot Unlighted or Externally Lighted Wind Cone Assemblies | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 35.01-3(b) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (38) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F D | 1995 | Fluoride by SPADNS Method | American Public Health Association | |
Coast Guard | 36 CFR 1237.18(a)(1) | ISO 18911 | 2000 | Imaging Materials--Processed Safety Photographic Film--Storage Practices | International Organization for Standardization | |
Energy Department | 10 CFR 429.110(a)(3) | ISO/IEC 17025 | 2005 | General Requirements for the Competence of Testing and Calibration Laboratories | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 59.412(b)(1) | ASTM C 1315 | 1995 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete | ASTM International |