This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | 1986 | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(2) | ASTM C 94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(25) | API MPMS | 2015 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(41) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products and Lubricating Oils | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(57) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(73) | API RP 17H | 2013 | Remotely Operated Tools and Interfaces on Subsea Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(89) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(3) | ASTM C 150-07 | 2007 | Standard Specification for Portland Cement | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(3) | ACI 357R-84 | 1984 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(9) | API MPMS | 1989 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (b)(2)(v) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (c) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (d) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (d) | ISO/IEC 17021-1 | 2015 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements | International Organization for Standardization |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(1) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(i) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(ii) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iii) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iv) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21979 | 30 CFR 250.733(b)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.735(a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.736 (d)(1) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21983 | 30 CFR 250.739 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Consumer Product Safety Commission | 84 FR 24021 | 16 CFR 1450 | ANSI/APSP/ICC–16 2017 | 2017 | Virginia Graeme Baker Pool and Spa Safety Act; Incorporation by Reference of Successor Standard | Pool & Hot Tub Alliance |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14E | 2000 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 500 | 2012 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 505 | 2018 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14FZ | 2013 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(vi) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14F | 2018 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14J | 2001 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | ANSI/API Spec 6A | 2018 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(1) | API RP 14F | 2008 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API Spec 6AV1 | 2013 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(1) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(3) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14C | 2007 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |