Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 1065.705(b)(3) | IP-501 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry | Energy Institute | |
| Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM D 6581 | 2000 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography | ASTM International | |
| Environmental Protection Agency | 40 CFR 63.14(g)(1) | ASTM D 95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
| Food and Drug Administration | 21 CFR 172.372(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Consumer Product Safety Commission | 16 CFR 1203.4(p) | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (26) Thallium | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60.41c Coal | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
| Defense Department | 32 CFR 2002.14(c)(4) | FIPS PUB 200 | Minimum Security Requirements for Federal Information and Information Systems | National Institute of Standards and Technology, U.S. Department of Commerce | ||
| Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, General service incandescent lamp (22) | ANSI C78.20 | 2003 | Electric Lamps--A, G, PS, and Similar Shapes with E26 Medium Screw Bases | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 1796 | 1990 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(i) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
| Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 1 | ASTM D 2234 | 1989 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
| Coast Guard | 46 CFR 160.151-5(d)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
| Research and Special Programs Administration | 49 CFR 195.3(c) B12 | API 2000 | 1998 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
| Rural Utilities Service | 7 CFR 1755.890(i)(12) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.128(c)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
| Coast Guard | 46 CFR 125.180(b) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 572.113(a)(2) | Drawing No. 78051-64 | 0 | Torque jam nut | General Motors Corporation | |
| Labor Department | 41 CFR 50-204.69 | CGA G-8.1 | 1964 | Standard for the Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
| Research and Special Programs Administration | 49 CFR 176.11(a) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
| Coast Guard | 46 CFR 28.830(b) | UL 217 | 1985 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
| Environmental Protection Agency | 40 CFR 98.7(e)(24) | ASTM D 4809 | 2006 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
| Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 524 | 1988 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products | ASTM International | |
| Food and Drug Administration | 21 CFR 184.1150(b) | Food Chemicals Codex | 1996 | Bacterially-derived protease enzyme preparation | National Academy Press | |
| Federal Aviation Administration | 14 CFR 91.227(a) | FAA TSO-C166b | 2009 | Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) | Federal Aviation Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (105) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 60 | ACS Analytical Chemistry | 1977 | Spectrophotometric and Kinetics Investigation of the Berthelot Reaction for the Determination of Ammonia. Patton, C.J. and S.R. Crouch. 49(3):464-469 | American Chemical Society | |
| Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C1 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
| Environmental Protection Agency | 40 CFR 98.244(b)(4)(iv) | ASTM UOP 539 | 1997 | Refinery Gas Analysis by Gas Chromatography | ASTM International | |
| Environmental Protection Agency | 40 CFR 1060.810(b) Table 2 | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (66) | APHA Method 4500-S(2-) B | 2000 | Sulfide (as S), Separation of Soluble and Insoluble Sulfides | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 266.106(g)(2) | EPA SW-846 | 1986 | Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.1001 Note to In Light Liquid Service | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
| Food and Drug Administration | 21 CFR 172.864(b)(2) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
| Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
| Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.7M | 1987 | Whirlpool Bathtub Appliances | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 56.85-10 Table 56.85-10 | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
| Coast Guard | 40 CFR 60, Appendix A-5, Method 13A, Section 16.1 | ASTM D 3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
| Coast Guard | 46 CFR 76.01-2(d)(1) | UL 19 | 2001 | Standard for Safety, Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
| Coast Guard | 33 CFR 183.5(b) | ASTM D 2842 | 1997 | Water Absorption of Rigid Cellular Plastics | ASTM International | |
| National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-3000 | 0 | Upper/Lower Torso Assembly | Reprographic Technologies | |
| Coast Guard | 33 CFR 154.808(b) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 63.4141(b)(3) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(78) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction; Second Edition | American Petroleum Institute | |
| Coast Guard | 46 CFR 160.048-4(b) | Federal Standard 751 | 0 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
| Coast Guard | 46 CFR 160.170-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9221 B | 2005 | Multiple Tube Fermentation Qualitative (LTB): Total Coliform | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 6883 | 2004 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles | ASTM International |