DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.220-7 | ASTM A 240/A 240M | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | ||
Coast Guard | 29 CFR 1917.91(a)(1)(i)(B) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(e)(11) | ISO 10478 | 1994 | Petroleum products--Determination of aluminum and silicon in fuel oils--Inductively coupled plasma emission and atomic absorption spectroscopy methods | International Organization for Standardization | |
Rural Utilities Service | 7 CFR 1755.890(a)(7) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.211(c)(1)(iv) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (48) | APHA Method 5530 D | 2005 | Phenols, Direct Photometric Method | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(viii) | Drawing No. 880105-728-2 | 2000 | Complete Arm Assembly, Right | Reprographic Technologies | |
Coast Guard | 46 CFR 183.420 | UL 1104 | 1974 | Standard for Marine Navigation Lights | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.217(b)(12) | ASME B&PV Code | 1968 | Code for Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.593a(d) | ASTM D 86 | 1990 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9071B | 1998 | n-Hexane Extractable Material (HEW) for Sludge, Sediment, and Solid Samples | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.62(b)(1) | FMVSS 217 | 1998 | Bus Emergency Exits and Window Retention and Release | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.20-3(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(45) | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 2 | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 200.8 | 0 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.94(g)(3) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(1)(i) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Food and Drug Administration | 21 CFR 177.2490(a) | FDA Publication | 1965 | Oxygen Flask Combustion-Gravemetric Method for Determination of Sulfur in Organic Compounds | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Aviation Administration | 14 CFR 97.20(b) | FAA Form 8260.15A | 1993 | Takeoff minimums and obstacle departure procedures (ODPs) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-17(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (2-propanone (acetone)) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2500(a)(3) | WIUIC regulations | 1982 | Chapter NR 113, Servicing Septic Tanks, Seepage Pits, Grease Traps or Privies, Wisconsin Administrative Code §§ NR 113.07-113.08 (1979), as amended by Natural Resources Board Order No. WQ-25-82. | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 63.11551(c)(1)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 94.5(a)(8) | ASTM D 2622 | 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 1036 | 1991 | Standard Specification for Flat Glass | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.2 Laminated partition | IME Publication | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
National Highway Traffic Safety Administration | 49 CFR 571.103 S4.3 | SAE J-902a | 1967 | Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.120(c)(3)(iii) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(6) | Drawing No. SA-SID-M080 | 1987 | Leg Assembly, Right | Reprographic Technologies | |
Interior Department | 43 CFR 11.41(b) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 21 CFR 184.1090(b) | Food Chemicals Codex | 1981 | Stearic Acid | National Academy Press | |
Food and Drug Administration | 21 CFR 177.2000(d)(2) | ASTM D 3536 | 1976 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Exclusion Chromatography (Gel Permeation Chromatography--GPC) | ASTM International | |
Coast Guard | 33 CFR 183.5(b) | IEEE 45 | 1983 | Recommended Practice for Electrical Installations on Shipboard—Cable Construction | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 238.30(a) | ASTM D 3826 | 1991 | Standard Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.818(b)(4) | ASTM F 496 | 1997 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Federal Aviation Administration | 14 CFR 71.71(c) | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (101) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | APHA Method 6251 B | 1994 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(33) | ASTM D 3173 | 2008 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(i) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 60.704(d)(2)(ii) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 184.1229(b) | Food Chemicals Codex | 1981 | Calcium Stearate | National Academy Press | |
Homeland Security Department | 6 CFR 37.19 | ISO/IEC 15438:2006(E) | 2006 | Information Technology—Automatic identification and data capture techniques—PDF417 symbology specification | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | APHA Method 4500-SO4(2-) G | 1997 | Sulfate, Methylthymol Blue Flow Injection Analysis | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 14 | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Coal | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 1036.805 | NIST Special Publication 811 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | ||
Coast Guard | 40 CFR 136.3(a) Table IB (2) | EPA Method 310.2 | 1974 | Alkalinity as CaCO3 - Colorimetric, Automated | U.S. Environmental Protection Agency |