This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.2 | 1996 | Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 588 | 1981 | High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-7 | 2004 | A Guide for the Preparation of Precautionary Markings for Compressed Gas Containers, Appendix A, 6th Edition | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Publication | 1988 | AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.3 | 1991 | Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 606 | 1975 | Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-2.2 | 1985 | Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | NIST Handbook H-28 | 1957 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics | American Pyrotechnics Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 114 | 1995 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7866 | 1999 | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10462 | 2005 | Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | DOD TB 700-2 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 633 | 1979 | Standard Specification for Normalized High-Strength Low Alloy Structural Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6 | 1993 | Standard for Visual Inspection of Compressed Gas Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 213 | 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA P-20 | 1995 | Standard for the Classification of Toxic Gas Mixtures | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-1 | 1990 | Series 1 Freight Containers--Specification and Testing--Part 1, General Cargo Containers | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3036 | 1975 | Board-Determination of Puncture Resistance | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | OECD No. 404 | 1992 | Guideline for Testing of Chemicals, Acute Dermal Irritation/Corrosion | Organization for Economic Cooperation and Development | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 715 | 1981 | Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.1 | 2002 | Standard for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AWWA C 207 | 1955 | Steel Pipe Flanges | American Water Works Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-1 | 1999 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11114-1 | 1997 | Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ATA Specification No. 300 | 1996 | Packaging of Airline Supplies | Air Transport Association of America | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-3 | 1994 | Standards for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA S-7 | 2005 | Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | Drawing No. 137-5 | 1996 | Standard for Housing and Manway Covers for Steel Cargo Tanks | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM E 23 | 1998 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ASTM International |