DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort descending |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 4 | USGS Publication | 1989 | Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | USGS I-3630-85 | 1989 | Potassium, Atomic Absorption Spectrometric, Direct | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB Footnote 24 | USGS Publication | 1987 | Methods for Analysis of Organic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3 | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (19) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
National Oceanic and Atmospheric Administration | 50 CFR 226.205 | USGS Paper 2294 | 1987 | Hydrologic Unit Maps, Water Supply | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (55) | USGS O-3104-83 | 0 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Coast Guard | 40 CFR 136.3(a) Table IB (1) | USGS I-1020-85 | 1989 | Acidity using H2O2 procedure | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (55) | USGS I-3765-85 | 1985 | Solids, residue suspended evaporation 105 degrees C | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(xiii) | USGS Water-Resources Investigations Report 01-4132 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Organic Plus Inorganic Mercury in Filtered and Unfiltered Natural Water With Cold Vapor-Atomic Fluorescence Spectrometry | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Plant | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Standard Industrial Classification Manual | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 52.742(c) | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 763 Appendix E 2.10(9) | NRL Report 7879 | 1975 | Quantitative Analysis of Airborne Asbestos by X-ray Diffraction | U.S. Naval Research Laboratory | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(i) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(2) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 194.22(b) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(iii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 87 FR 11934 | 10 CFR 50 | NUREG–2228 | Approval of American Society of Mechanical Engineers' Code Cases | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(B) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(c)(3)(iv) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iv)(A) | NRC Regulatory Guide 1.147 | 2007 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 88 FR 3287 | 10 CFR 52 | NuScale DCA, Rev. 5 | 2020 | NuScale Small Modular Reactor Design Certification | U.S. Nuclear Regulatory Commission |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iv)(B) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Reference 2 | NRC Guide 3.59 | 1987 | Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Coast Guard | 10 CFR 50.55a(b)(5)(iii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(i) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(d)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(i) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(ii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 194.5(a)(1) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.53(a) | 10 CFR Part 20 | 0 | Protection Against Radiation | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 194.27(b) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | NRC Regulatory Guide 1.147 | 2007 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission |