Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(18) | ASTM C 330-05 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International | ||
| Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(2)(v) | API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.919(b)(2) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (d) | ISO/IEC 17021-1 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements | International Organization for Standardization | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(17) | API MPMS | 2005 | Chapter 5, Section 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.1002(b)(4) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(29) | API MPMS | Chapter 7—Temperature Determination, | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(93) | ANSI/API Spec. Q1 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a)(10) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1) | API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.920(b) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(81) | API MPMS | 2008 | Chapter 5—Metering, Section 6—Measurement of Liquid Hydrocarbons by Coriolis Meters; First Edition | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(22) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(22) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(46) | API MPMS | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(3) | AWS D3.6M:1999 | Specification for Underwater Welding | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(1) | ANSI/API Spec. 17J | Specification for Unbonded Flexible Pipe | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(53) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.517(h) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(25) | API MPMS | 2006 | Chapter 8, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(1) | ANSI/ASME B 16.5-2003 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(62) | API RP 2RD | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(3) | ANSI/AISC 360-05 | Specification for Structural Steel Buildings | American National Standards Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.869(a)(3) | API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(4) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(63) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(21) | API MPMS | 2007 | Chapter 6, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(14) | API MPMS | Chapter 4—Proving Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(78) | API RP 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(19) | ASTM C 595-08 | Standard Specification for Blended Hydraulic Cements | ASTM International | ||
| Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(3)(i) | API RP 14G | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21979 | 30 CFR 250.733(b)(2) | API RP 2RD | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.1007(a)(4)(i)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(30) | API MPMS | Chapter 8—Sampling, Section 1—Standard Practice for Manual Sampling of Petroleum and Petroleum Products | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(94) | API Standard 53 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.920(c) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(5) | ASME B31.8 | 2003 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(3) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(47) | API MPMS | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 1—General Equations and Uncertainty Guidelines | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(i)(1) | NACE MR0175-2003 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments | National Association of Corrosion Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(4) | ANSI/API Spec. 17J | Specification for Unbonded Flexible Pipe | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(5) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(54) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.618(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(26) | API MPMS | 2005 | Chapter 8, Section 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(2) | ANSI/ASME B 31.8-2003 | Gas Transmission and Distribution Piping Systems | American National Standards Institute |