Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 63.3531(c) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 36 | CEM Publication | 1992 | Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals | CEM Corporation | |
| Occupational Safety and Health Administration | 29 CFR 1910.265(c)(20)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 268/A 268M | 1996 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | ASTM International | |
| Mine Safety and Health Administration | 30 CFR 57.3203(a) | ASTM F 432 | 1995 | Standard Specification for Roof and Rock Bolts and Accessories | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(xi) | ASTM E 1590 | 2001 | Standard Test Method for Fire Testing of Mattresses | ASTM International | |
| Environmental Protection Agency | 40 CFR 65.147(a)(4)(i)(A) | ASTM D 1946 | 1977 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
| Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
| Coast Guard | 46 CFR 58.03-1(h)(1) | IMO Publication A.467(XII) | 1981 | Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight | International Maritime Organization | |
| Interior Department | 43 CFR 11.34(b) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
| Research and Special Programs Administration | 49 CFR 178.345-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 28.335(b) | ABYC H-25 | 1986 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
| Environmental Protection Agency | 40 CFR 60.17(g)(180) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.919(b)(2) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Veterans Affairs Department | 38 CFR 17.74(g)(5) | NFPA 720 | 2009 | Installation of Carbon Monoxide (CO) Detection and Warning Equipment | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(l)(42) | SAE J-1100 | 1993 | Motor Vehicle Dimensions | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (42) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 147.52(a) | ALUIC regulations | 0 | State Oil and Gas Board of Alabama Rule 400-4-1-.02, Definitions, and Rule 400-4-5-.04, Protection of Underground Sources of Drinking Water during the Hydraulic Fracturing of Coal Beds | State of Alabama | |
| Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1266 | 2003 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
| Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
| Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 496 | 2008 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (46) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 303 | 0 | Radioactive Strontium 89 and 90, Radiochemical Method | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2.1 | ASTM D 2369 | 1993 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IA (5) | EPA Method 1603 | 2009 | Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC) | U.S. Environmental Protection Agency | |
| Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 1415 | 1988 | Standard Test Method for Rubber Property--International Hardness | ASTM International | |
| Mine Safety and Health Administration | 30 CFR 57.13015(a) | NB-23 | 1979 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
| Technology Administration | 15 CFR 1150.3(a) | Federal Standard 595A | 1987 | Color 12199, Blaze Orange | Federal Specifications Standards and Test Methods | |
| Coast Guard | 21 CFR 184.1133(b) | Food Chemicals Codex | 1981 | Ammonium Alginate | National Academy Press | |
| Rural Utilities Service | 7 CFR 1755.860(i)(4)(iii) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(b)(10)(vi) | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
| Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
| National Highway Traffic Safety Administration | 49 CFR 572.41(a) | Drawing No. SA-SID-M001 | 1996 | Completed Assembly Side Impact Dummy, Revision C | Reprographic Technologies | |
| Coast Guard | 46 CFR 120.410(d) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 110.10-1(k)(5) | NEMA Publication WC-3 | 1992 | Rubber Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy | National Electrical Manufacturers Association | |
| Energy Department | 10 CFR 435.5(b) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
| Federal Aviation Administration | 14 CFR 36.6(c)(1)(vii) | IEC 61094-4 | 1995 | Measurement Microphones--Part 4: Specifications for Working Standard Microphones, edition 1.0 | International Electrotechnical Commission | |
| Coast Guard | 46 CFR 39.1005(f)(1) | IMO SOLAS | 1986 | International Convention for the Safety of Life at Sea, Consolidated Text of the 1974 SOLAS Convention, the 1978 SOLAS Protocol, the 1981 and 1983 SOLAS Amendments | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (41) | EPA Method 1664 | 1999 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision A | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F C | 1995 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 86.1(g)(10) | SAE J-1939-13 | 1999 | Off-Board Diagnostic Connector | Society of Automotive Engineers | |
| Energy Department | 10 CFR 430 Subpart B, App. S, 2b | ASME A112.18.1M | 1996 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
| Environmental Protection Agency | 40 CFR 1043.20 EIAPP certificate | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(N) | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.1 | 1971 | Chromium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.457(b)(5)(i) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
| Coast Guard | 46 CFR 164.018-5(a)(4) | FedSpec CCC-C-443E | 1974 | Cloth, Duck, Cotton (Single and Plied Filling Yarns, Flat) | Federal Specifications Standards and Test Methods | |
| Environmental Protection Agency | 40 CFR 147.850(a)(2) | KSUIC regulations | 1986 | Chapter 28, Article 46, Underground Injection Control Regulations, Kansas Administrative Regulations §§ 28-46-1 through 28-46-42 (1986 and Supp. 1987) | State of Kansas |