This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.2730(j) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
Housing and Urban Development Department | 24 CFR 200.944(a)(4) | NIST PS 1 | 1983 | Product Standard for Construction and Industrial Plywood with Typical APA Trademarks | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (9) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table Note 2 | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.253(b)(4)(iv) | NFPA 566 | 1965 | Standard for the Installation of Bulk Oxygen Systems at Consumer Sites | National Fire Protection Association | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.51(b)(1) 249 | National Formulary | 1980 | Formula No. 25-A | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM D 610 | 1989 | Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces | ASTM International | |
Coast Guard | 33 CFR 154.814(j)(4) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Mine Safety and Health Administration | 30 CFR 56.6133(b) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Interior Department | 43 CFR 11.42(a) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.37(k)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Energy Department | 10 CFR 431.76(d)(2) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AFTO 11A-1-47 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C7 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.6201(b)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(157) | ASTM D 4442 | 1984 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(a)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-5(b)(6) | ASTM D 792 | 2008 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | ASM Applied and Environmental Microbiology | 1993 | New Medium for the Simultaneous Detection of Total Coliforms and Escherichia coli in Water. Appl. Environ. Microbiol. 59:3534-3544, Brenner et al. | American Society for Microbiology | |
Environmental Protection Agency | 40 CFR 80.8(e)(1)(ii) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 46 CFR 160.077-11(a)(5)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(iii) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Toxaphene) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 63.99(a)(5)(ii)(C) | CA State Regulations | 2010 | California Regulatory Requirements Applicable to the Air Toxics Program | State of California | |
Coast Guard | 46 CFR 160.040-1(a)(1) | MIL-R-23139B | 1965 | Rocket Motors, Surface Launched, Development and Qualification | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 177.1050(c)(3) | FDA Publication | 1987 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.052-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 587.6(b) | Drawing No. DSL-1290 | 1991 | Side Impact Moving Deformable Barrier Drawings | Reprographic Technologies | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 516 | 1990 | Standard Specification for Vermiculite Loose Fill Thermal Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(2) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Coast Guard | 33 CFR 126.5(b) | NFPA 51B | 1994 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 1005.0 | 2002 | Sheepshead Minnow, Cryprinodon variegatus, Embryo-larval Survival and Teratogenicity Test Method | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (28) | EPA Method 150.2 | 1982 | ph - Electrometric, continuous monitor | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(131) | ASTM D 3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(8) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Public Health Service | 42 CFR 37.51(b) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(i)(1) | ISO 7117:1995(E) | 1995 | Motorcycles—Measurement of maximum speed, Second edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | EPA Method 300.1 | 2000 | Ion chromatography - anions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(6)(v) | ASME MFC-22 | 2007 | Measurement of Liquid by Turbine Flowmeters | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(5) | SAE J-185 | 2003 | Access Systems for Off-Road Machines | Society of Automotive Engineers |