This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(Q) | AOAC Method 973.55 | 1998 | Phosphorus in water, Photometric method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(i) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1656(b)(7)(ii) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 3606 | 1992 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Coast Guard | 33 CFR 183.516(a)(2) | MIL-P-21929B | 1970 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
Rural Utilities Service | 33 CFR 154, Appendix A, 8.6 | ASME B&PV Code | 2005 | Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.664(e)(4) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 78051-319 | 1987 | Load cell simulator | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Ethion) | EPA Method 614.1 | 1993 | The Determination of Organophosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 2.2.11(2) | EPA Publication | 1978 | Traceability Protocol for Establishing True Concentrations of Gases Used for Calibration and Audits of Continuous Source Emission Monitors (Protocol No. 1) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (18) | APHA Method 3500-Cr B | 2009 | Chromium by Colorimetric (Diphenyl-carbazide) | American Public Health Association | |
Rural Utilities Service | 7 CFR 1728.201(h)(2)(i) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Rural Utilities Service | 7 CFR 1728.97(a)(22) | RUS Bulletin 1728F-803 | 1998 | Specifications and Drawings for 24.9/14.4 kV Line Construction | Rural Utilities Service, U.S. Department of Agriculture | |
Federal Trade Commission | 16 CFR 460.5(e)(2)(i) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 58.03-1(d)(3) | ANSI B93.5 | 1979 | Recommended practice for the use of Fire Resistant Fluids for Fluid Power Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 94.5(b)(1) | Annex VI of MARPOL 73/78 | 1997 | Resolution 2—Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines | International Maritime Organization | |
Animal and Plant Health Inspection Service | 7 CFR 353.9(b)(3) | ASQ Q9001 | 1994 | Quality Systems-Model for Quality Assurance in Design, Development, Production, Installation and Servicing | American Society for Quality Control | |
Coast Guard | 46 CFR 160.156-11(c)(2)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 3 | ASTM Annual Book of Standards | 1994 | Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02 | ASTM International | |
Education Department | 34 CFR 75.616(b)(2) | ASHRAE 90B | 1975 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(2)(iv) | EN50155 | 2013 | Railway Applications: Electronic Equipment Used in Rolling Stock | European Standards | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (12) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9221 F | 1998 | Multiple Tube Fermentation Qualitative (LTB/EC MUG): Total Coliform and E. Coli | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.40 (d)(2) | UL 746C | 2004 | Standard for Safety: Polymeric Materials—Use in Electrical Equipment Evaluations | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 434.701.1 RS-11 | AAMA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-11) | American Architectural Manufacturers Association | |
Minerals Management Service | 30 CFR 254.26(e)(2) | ASTM F 625 | 1994 | Standard Practice for Describing Environmental Conditions Relevant to Spill Control Systems for Use on Water | ASTM International | |
Coast Guard | 33 CFR 127.101 | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.214 S12.1.3(b)(2) | Drawing No. 78051-532 | 1996 | Pelvic Angle Gauge | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 62.14105(a) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.4 | 1983 | Plastic Water Closet Bowls and Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (8) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table Note 2 | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.2710(s)(1)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 137.250(b)(1)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.60(a) | The United States Pharmacopoeia | 1980 | Formula No. 33 | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 21 CFR 177.1550(e)(1) Footnote 1 | FDA Publication | 1989 | Preparation of Extracts | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5850(e)(4) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(71) | API 6A V1 | 2003 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-4(e) | DWG No. F-49-6-5 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Energy Department | 10 CFR 430 Subpart B, App. R, 4.1.1 | ANSI C78.901 | 2005 | Electric Lamps--Single-Based Fluorescent Lamps--Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(37) | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Food and Drug Administration | 21 CFR 178.3610(a) | FDA Publication | 1977 | Determination of Softening Point (Drop Method) | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 184.1631(b) | Food Chemicals Codex | 1981 | Potassium Hydroxide | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | APHA Method 9222 B | 1997 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association |