Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24A, Section 6.5 |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(c)(5)(iii)(B) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Coast Guard |
|
46 CFR 160.062-3(a) |
MIL-R-15041C |
1960 |
Releases, Lifesaving Equipment, Hydraulic and Manual
|
U.S. Department of Defense |
Coast Guard |
|
46 CFR 160.005-1(a)(3) |
MIL-R-2766 |
1960 |
Batt, Fibrous Glass, Lifesaving Equipment
|
U.S. Department of Defense |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(d)(1) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(c)(7)(iv)(A) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Federal Aviation Administration |
|
14 CFR 27.613(d)(2) |
MIL-HDBK-17 |
1960 |
Plastics for Aerospace Vehicles
|
U.S. Department of Defense |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24A, Section 7.1 |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(o)(1) |
IME Pamphlet No. 17 |
1960 |
Safety in the Handling and Use of Explosives
|
Institute of Makers of Explosives |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(a)(3)(iv) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.57(f)(4)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(f)(2)(iv) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.552(d) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-4, Method 7, Section 16.0(2) |
ASTM D1608 |
1960 |
Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(a)(4)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(11) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60.17(g)(58) |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.57(g)(3)(ix) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60.435(d)(1) |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(41) |
ANSI K61.1 |
1960 |
Safety Requirements for the Storage and Handling of Anhydrous Ammonia
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.57(g)(4)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(h)(2)(ii) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(b)(3)(ix) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.57(g)(4)(ii) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 6.1 |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Coast Guard |
|
46 CFR 172.020(b)(1) |
IMO Resolution A.264(VIII) |
1960 |
Amendment to Chapter VI of the International Convention for the Safety of Life at Sea
|
International Maritime Organization |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(b)(4)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(g)(1)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(51) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Food and Drug Administration |
|
21 CFR 177.1200(c) |
ASTM D127 |
1960 |
Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(b)(4)(ii) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(a)(4)(iii) |
IME Pamphlet No. 17 |
1960 |
Safety in the Handling and Use of Explosives
|
Institute of Makers of Explosives |
Coast Guard |
|
46 CFR 172.015(a)(2) |
IMO Resolution A.264(VIII) |
1960 |
Amendment to Chapter VI of the International Convention for the Safety of Life at Sea
|
International Maritime Organization |
Food and Drug Administration |
|
21 CFR 176.180(b)(2) |
ASTM D127 |
1960 |
Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(10) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators (Inspector's Manual)
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(g)(1)(iii) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Labor Department |
|
41 CFR 50-204.66(b) |
CGA G-1.3 |
1959 |
Acetylene Transmission for Chemical Synthesis
|
Compressed Gas Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(e)(3)(i), Table H-32 |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(10)(iv), Table H-26 |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(12) |
ASME B56.1 |
1959 |
Safety Standard for Powered Industrial Trucks
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(10) |
CGA S-1.3 |
1959 |
Safety Release Device Standards-Compressed Gas Storage Containers
|
Compressed Gas Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.111(d)(4)(ii)(B) |
CGA S-1.3 |
1959 |
Safety Release Device Standard--Compressed Gas Storage Containers
|
Compressed Gas Association |
Coast Guard |
|
46 CFR 160.026-3(b) |
MIL-L-7178 |
1959 |
Lacquer, Cellulose Nitrate, Glass for Aircraft
|
U.S. Department of Defense |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(18) |
ASTM D1123 |
1959 |
Standard Method of Test for Water in Concentrated Engine Antifreezes by the Iodine Reagent Method
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(d)(2), Table H-31 |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.69(a)(2) |
NFPA 58 |
1959 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(h)(2), Table H-34 |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(iv)(A)(1) |
CGA S-1.3 |
1959 |
Safety Release Device Standard--Compressed Gas Storage Containers
|
Compressed Gas Association |
Occupational Safety and Health Administration |
|
29 CFR 1917.50(j)(1) |
ASME B56.1 |
1959 |
Safety Standard for Powered Industrial Trucks
|
American Society of Mechanical Engineers |