This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(3) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1211.6 (c) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Energy Department | 87 FR 50396 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Ceiling Fans | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-383X | 2011 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE 45.2–2011 | 2011 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Rural Utilities Service | 7 CFR 1728.202(b)(3) | RUS Bulletin 1728F-700 | 2011 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Energy Department | 88 FR 31102 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(iii) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Coast Guard | 45 CFR 162.1203(a)(5) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 3683 | 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption | ASTM International | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | Greenhouse Gas Emissions Model (GEM) version 2.0.1 | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | U.S. Environmental Protection Agency |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Coast Guard | 45 CFR 162.1203(a)(4) | CAQH Publication | 2011 | Phase I CORE 155: Eligibility and Benefits Batch Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5200 | 2011 | Lower upper leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(7) | DICOM Standard PS 3.16-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource | National Electrical Manufacturers Association | |
Federal Communications Commission | 47 CFR 80.1101(b) | 47 CFR 80.1063 | 2011 | Special requirements for INMARSAT-E EPIRB stations | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24640C with Supplement 1 | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. 420-2070 | 2011 | Lower neck bracket assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.44(a) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Health and Human Services Department | 45 CFR 170.202(b) | ONC XDR/XDM for Direct Messaging v1.0 | 2011 | ONC XDR and XDM for Direct Messaging Specification | Office of the National Coordinator for Health Information Technology | |
Environmental Protection Agency | 40 CFR 60.17(o)(1) | TAPPI Method T624 | 2011 | Gross Heating Value of Black Liquor | Technical Association of the Pulp and Paper Industry | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 45 CFR 162.920(c)(3)(iii) | CAQH Publication | 2011 | Phase II CORE 259: Eligibility and Benefits 270/271 AAA Error Code Reporting Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 85 FR 50757 | 10 CFR 430 | IEC 62301 Ed. 1.0 b:2005 | 2011 | Energy Conservation Program: Test Procedures for Cooking Products | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 1065.1010(b)(42) | ASTM D 6615 | 2011 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel | ASTM International | |
Federal Trade Commission | 92 FR 20788 | 16 CFR 460.5 (e)(2)(viii) | ASTM C 1363-11 | 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 60.73a(c)(2)(ii) | ASTM E 1584 | 2011 | Standard Test Method for Assay of Nitric Acid 2011 EPA/AP | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 4468 | 2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 86 FR 56608 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Clothes Dryers | International Electrotechnical Commission |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |