This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.411(b)(4)(ii) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.84(b) 144 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.31(a)(8) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.307(a)(4)(iv) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.440(c) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.46(b)(4) Table 1, Note 2 | ASTM B 221 | 1976 | Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(e)(4) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.735(b) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.11(b) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 633 | 1979 | Standard Specification for Normalized High-Strength Low Alloy Structural Steel | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7866 | 1999 | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(c) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(3) B13c | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(a)(3) "Fine grain steel" | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.935(b)(1)(iv) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(4) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 114 | 1995 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10462 | 2005 | Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.185(a)(1) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.227(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a)(1) | ASTM A 1011/A 1011M | 2003 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.3(e)(2) | CI B Kit | 2003 | Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.2(a)(8) | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.283(b)(1) | ASTM D 638 | 2003 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 174.63(c)(4) | AAR Specification M-952 | 1988 | Intermodal Container Support and Securement Systems for Freight Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.56(b)(2)(i) | NAVSEAINST 8020.8B | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.33(h) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.360-4(a)(2)(i) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(40) | EPA-821-B-98-016 | 1998 | Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1667 | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(c)(3) C3 | ASME B31G | 2004 | Manual for Determining the Remaining Strength of Corroded Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-17(b) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.115(c)(2) | CGA P-20 | 1995 | Standard for the Classification of Toxic Gas Mixtures | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.921(a)(1) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(2) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.579(d) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.11(c) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 715 | 1981 | Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(h) | ISO 7866 | 1999 | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) D5 | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(f)(1)(v) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.202(e) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.222(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.937(c)(1) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers |