This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(4)(i) | ISO 11660-1:2008(E) | 2008 | Cranes—Access, guards and restraints—Part 1: General, 2d ed. | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) Table H-24 Footnote 1 | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(15) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(41) | ANSI K61.1 | 1960 | Safety Requirements for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(i) | NFPA 32 | 1970 | Standard for Dry Cleaning Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(49) | ANSI Z9.1 | 1951 | Safety Code for Ventilation and Operation of Open Surface Tanks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(iv) | ANSI A17.2 | 1960 | Practice for the Inspection of Elevators | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(22) | ANSI Z88.5 | 2014 | Practice for Respiratory Protection for the Fire Service | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.266(d)(3)(iv) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | PCSA 2 | 1968 | Mobile Hydraulic Crane Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 40 CFR 1065.703 Table 1 | ASTM D 86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart T Appendix C (4)(a)(i) | NOAA Diving Manual | 2001 | National Oceanic and Atmospheric Administration Diving Manual | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Occupational Safety and Health Administration | 29 CFR 1915.72(a)(4) | ANSI A14.2 | 1972 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(3) | API 12D | 1957 | Specification for Large Welded Production Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(5) Note (3) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.103(b)(2) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.243(e)(1)(i) | 29 CFR 1910.212 | 2014 | Subpart O, Machinery and Machine Guarding, General Requirements for All Machines | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1910.269(j)(1)(iii) Note | ASTM F 711 | 1989 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live-Line Tools | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(10) | SAE J-321a | 1970 | Fenders for Pneumatic-Tired Earthmoving Haulage Equipment | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(10) | ASME B30.14, Section 14-3.1.2 | 2004 | Side Boom Tractors, Operator Qualifications | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.153(a)(2) | 49 CFR Part 178 | 2014 | Shipping Container Specifications | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.218(d)(4) | ANSI B31.1.0 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(4) | CGA G-7.1 | 1966 | Commodity Specification | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph U-201 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.135(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12B | 2014 | Halon 1301 Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(11)(iii)(A)(1) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.120, Appendix C, 2 | NFPA 472 | 2013 | Standard for Professional Competence of Responders to Hazardous Material Incidents | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(6)(ii) | NFPA 1982 | 1998 | Standard on Personal Alert Safety Systems (PASS) | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(2) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(2)(iv) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1701 | 2012 | Standard Specification for Unused Polypropylene Rope with Special Electrical Properties | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(4) | ANSI A12.1 | 1967 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(3) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.102 (b)(iii) | ANSI Z87.1-1989 (R-1998) | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(1)(ii) | 29 CFR 1910.107(a) | 2014 | Spray Finishing Using Flammable and Combustible Materials, Definitions | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 72B | 2014 | Auxiliary Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix B | USDOC PS 20 | 1970 | American Softwood Lumber Standard | U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1926.202 | DOT Publication | 2000 | Manual on Uniform Traffic Control Devices, Millennium Edition | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(1) | USPHS Publication | 1998 | U.S. Pharmacopeia | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(1) | ANSI A10.3 | 1970 | Safety Requirements for Explosive-Actuated Fastening Tools | American National Standards Institute | |
Occupational Safety and Health Administration | 16 CFR 1615.32(a)(1) Note 6 | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists |