This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.8) | 40 CFR Part 136, appendix B | 2011 | Definition and Procedure for the Determination of the Method Detection Limit-Revision 1.11 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(h)(1) | ASTM D 86 | 2007 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 160.077-19(c)(12) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (6) | USGS B-0055-85 | 1989 | Membrane Filtration Quantitative: Fecal Streptococci | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 63.2354(b)(3)(ii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 178.3870(f)(4) | ASTM D 88 | 1981 | Standard Test Method for Saybolt Viscosity | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1630.4(b)(1)(ii) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 56.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 121.240(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S9.3.5 | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 92.508(a) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 33 CFR 183.430(a)(2)(ii) | SAE J-1128 | 1975 | Low Tension Primary Cable | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Zinc) | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | ANSI B30.5 | 1968 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Research and Special Programs Administration | 49 CFR 178.61(d)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Coast Guard | 46 CFR 184.240(a) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(3)(iv) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(p)(1) | CA State Regulations | 2014 | Construction Safety Orders | State of California, Department of Industrial Relations | |
Public Health Service | 42 CFR 84.43(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(23) | SAE J-826 | 1980 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.334(h)(1) | ASTM D 6228 | 2003 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (42) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 302 | 2014 | Naturally Occurring Gross alpha and beta, Evaporation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 11, Section 16.0(4) | EPA-600-4-77-088a (Volume 1) | 1976 | Standardization of Method 11 at a Petroleum Refinery, Scheil, G.W., and M.C. Sharp. EPA Contract No. 68-02-1098 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b) | ANSI B31.1 Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | MIL-T-43548C | 1986 | Thread, Polyester Core: Cotton-, Rayon-, or Polyester-Covered | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.902(c)(3) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-5(c) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 3280.306(b)(2)(v) | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
Environmental Protection Agency | 40 CFR 89.327 | SAE J-1937 | 1989 | Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(a)(7) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(3) | Lloyd's Publication | 1998 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 80.580(e)(1)(iv) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.335(g)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | OIA Method OIA-1677 DW | 2004 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry, EPA-821-R-04-001 | OI Analytical | |
Environmental Protection Agency | 40 CFR 436.181(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 86.1(b)(20) | ASTM E 903 | 1996 | Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. R, 3.1 | IES LM-9 | 1999 | Electrical and Photometric Measurements of Fluorescent Lamps | Illuminating Engineering Society of North America | |
Coast Guard | 46 CFR 160.135-7(b)(27) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization |