This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 440 Appendix A | ARI 470 | 1987 | Desuperheater/Water Heaters | Air Conditioning and Refrigeration Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 1 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model AP | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (22) Selenium | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 1995 | Standard Classification of Coals by Rank | ASTM International | |
Food and Drug Administration | 21 CFR 177.2480(c)(4) | ASTM D 2133 | 1966 | Standard Specification for Acetal Resin Injection Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (19) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D 1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 72.13(a)(1) | ASTM D 388 | 1992 | Standard Classification of Coals by Rank | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | GSA All Federal Specifications | 2013 | All Federal Specifications without specific reference | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.150(a)(1)(ii) | Drawing No. 921022-041 | 2001 | Neck Assembly | Reprographic Technologies | |
Consumer Product Safety Commission | 16 CFR 1201.4(b)(3)(ii) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 785.17(c)(1)(i) | USDA Handbook 436 | 1975 | Soil Taxonomy | Soil Conservation Service, U.S. Department of Agriculture | |
Energy Department | 10 CFR 431.134(b) | ASHRAE 29 | 2005 | Methods of Testing Automatic Ice Makers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.2 | SAE J-826 | 1992 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.156-5(d)(6) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 131.44(a)(2) | Florida Administrative Code, Section 62-302.540 | 2005 | Water Quality Standards for Phosphorus Within the Everglades Protection Area, as annotated by EPA (Phosphorus Rule) | State of Florida | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xli) | APHA Method 4500-H+ | 2000 | pH Value | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.2155(a)(1) | ASTM D 1836 | 1983 | Standard Specification for Commercial Hexanes | ASTM International | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(xi) | ASTM D 5373 | 2002 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.51(d)(2) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
National Archives and Records Administration | 36 CFR 1235.46(b)(3) Table | ISO/IEC 16382 | 2000 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 181B | 1995 | Standard for Safety Closure Systems for use with Flexible Air Ducts and Air Connectors, First Edition, with 1998 revisions | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Captafol) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 262.87(a)(4) | OECD Publication | 2009 | Annex B (Green List) of the 2009 Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations | Organization for Economic Cooperation and Development | |
Environmental Protection Agency | 40 CFR 63, Subpart HHHHHHH, Table 10 | EPA SW-846-8270D | 2007 | Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.253(c)(2)(v) | NFPA 566 | 1965 | Standard for the Installation of Bulk Oxygen Systems at Consumer Sites | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(i)(A) | ANSI/ISEA Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | International Safety Equipment Association | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 1266 | 1998 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.34(b) | Drawing No. 78051-218 | 1998 | Hybrid III Anthropomorphic Test Dummy, Revision U | General Motors Corporation | |
Veterans Affairs Department | 38 CFR 17.74(p)(3)(i) | NFPA 13 | 2010 | Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 39.2011(b)(2) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(d)(16) | ASME B16.23 | 2002 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(53) | ASTM D 4256 | 1989 | Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.127(f) | Drawing No. SA-572-S50 | 1994 | Chest deflection transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Nuclear Regulatory Commission | 10 CFR 50.55a(d)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section III, paragraph NCA-1140, Subsection NCA | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.901(d)(1) | ASTM A 640 | 1997 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.165 | ANSI/NFPA 72C | 2014 | Remote Station Protective Signaling Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.31e Standard Metropolitan Statistical Area | OMB Bulletin No. 93–17 | 1993 | Revised Statistical Definitions for Metropolitan Areas | Executive Office of the President, Office of Management and Budget | |
Federal Railroad Administration | 49 CFR 213 Appendix D 2. (c)(1)(ii) | APTA SS-M-015-06 | 2007 | Standard for Wheel Flange Angle of Passenger Equipment | American Public Transit Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (5) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table Note 8 | EPA-821-R-02-022 | 2002 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(q)(1) | TAPPI Method T266 | 2006 | Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absorption Spectroscopy (Reaffirmation of T 266 om-02), Draft No. 2 | Technical Association of the Pulp and Paper Industry | |
Rural Utilities Service | 7 CFR 1728.202(f)(1) | AWPA M2 | 2007 | Standard for Inspection of Treated Timber Products | American Wood Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-45 | 1973 | Lightweight Approach Light Structure | Federal Aviation Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 58a | 1975 | Acrylic Plastic Sheets for Glazing | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (74) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. |