This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(22) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electric Apparatus | American National Standards Institute | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(h)(1) | IEEE 279 | 1971 | Criteria for Protection Systems for Nuclear Generating Stations | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (27) | EPA Method 130.1 | 1971 | Hardness - Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB (38) | EPA Method 352.1 | 1971 | Nitrate Nitrogen - Brucine | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.179(a)(43) Note | ANSI B30.9 | 1971 | Safety Code for Slings | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Coast Guard | 7 CFR 1755.390(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 77.403(a) | SAE J-231 | 1971 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(2) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Mine Safety and Health Administration | 30 CFR 75.1107-3(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Federal Railroad Administration | 49 CFR 229.51(a)(1) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.1 | 1971 | Zinc (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Railroad Administration | 49 CFR 229.51(b) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 77.801-1 | IEEE 32 | 1971 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-1641 | 1971 | Floor Covering, Translucent or Transparent Vinyl Surface with Backing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.7.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.890(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture |