This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(71) | API 6A V1 | 2003 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.405(a) | API RP 2003 | 1998 | Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents | American Petroleum Institute | |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 500 | 2012 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(32) | API MPMS | 2002 | Chapter 9—Density Determination, Section 1—Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(vi) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(84) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 3—Proving Reports; First Edition, reaffirmed 2009; i | American Petroleum Institute | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | API RP 500 | 2014 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2000 | Chapter 3, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(21) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) B6 | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(44) | API MPMS | 2006 | Chapter 14, Section 8 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(77) | API RP 90 | 2006 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(2) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(48) | API MPMS | 2000 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 2—Specification and Installation Requirements | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.855 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 80 | API MPMS 14.3.3–2013 | 2013 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | API RP 500 | 2014 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63.8105 Maximum true vapor pressure (1) | API 2517 | 1989 | Evaporative Loss from External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(2)(iv)(B)(1) | API 2000 | 1968 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.618(b) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Interior Department | 88 FR 6376 | 30 CFR 586 | API RP 2A–WSD | 2000 | Reorganization of Title 30-Renewable Energy and Alternate Uses of Existing Facilities on the Outer Continental Shelf | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.114(c) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.804(a) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1002(b)(5) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B4 | API 510 | 1997 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(7) | API MPMS | 2007 | Chapter 2, Section 2B | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 265.192(a)(3)(ii)(C) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(64) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(5) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.869(c) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 1090 | API MPMS 14.3.3–2013 | 2021 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Division 1 and Division 2 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(vi) | API MPMS | 2005 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1628(d)(2) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B3 | API 6D | 2002 | Specification for Pipeline Valves | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(9)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(78) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction; Second Edition | American Petroleum Institute | |
Transportation Department | 85 FR 8104 | 49 CFR 195 | API RP 1170, First Edition | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(16) | API MPMS | 1999 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(80) | API RP 2556 | 1993 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(4)(iii) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.736 (d)(1) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 60 | API MPMS 14.1 | 2016 | Test Methods and Performance Specifications for Air Emission Sources | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1630(a) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.264(b)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ANSI/API Spec. 14A | 2006 | Specifications for Subsurface Safety Valve Equipment | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.405(b) | API 2026 | 1998 | Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service | American Petroleum Institute |