This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NMAB 353-2 | 1979 | Test Equipment for Use in Determining Classifications of Combustible Dusts | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1)(iv) | Drawing No. 210-3000 | 2000 | Upper/Lower Torso Assembly | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(1)(iii) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3, 3.3, c | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(67) | ASTM B 858M | 1995 | Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(17) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Coast Guard | 46 CFR 160.005-4(b) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(iii) | IEC 61508-3 Corr. 1 | 1999 | Corrigendum 1- Part3: Software requirements | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (13) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(i) | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 2565 | 1992 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vii) | ASTM G 21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(40) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 173.375(a) | USP 30/NF 25 | 2007 | United States Pharmacopeia (USP)/National Formulary (NF) pp. 1700-1701 | U.S. Pharmacopeial Convention | |
Food and Drug Administration | 21 CFR 184.1697(b) | Food Chemicals Codex | 1981 | Riboflavin-5'-phosphate (Sodium) | National Academy Press | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | ASTM D 418 | 1992 | Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (9) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Atrazine) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart DDDD, Table 6, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1218.2 | ASTM F2194 | 2013 | Standard Consumer Safety Specification for Bassinets and Cradles | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(h)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(10)(iv) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-61X | 1978 | Head Assembly, Complete, Revision T | General Motors Corporation | |
Coast Guard | 46 CFR 67.13(b) | DOC Publication 55DC | 1987 | Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas | U.S. Department of Commerce | |
Energy Department | 10 CFR 430.3(m)(1) | NSF 51 | 2007 | Food Equipment Materials | National Sanitation Foundation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 164.120-5(b)(10) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (23) | ASTM D 7284 | 2008 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) | IDEXX Colisure Test | 1994 | Detect coliforms/E. coli with the convenience of a long-read window | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 799.6756(e)(22) | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 52, Subpart LL | OKSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Oklahoma | |
National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | ISO 3334 | 1991 | Micrographics--ISO Resolution Test Chart No. 2--Description and Use | International Organization for Standardization | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(160) | ASTM D 4457 | 1985 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
National Highway Traffic Safety Administration | 49 CFr 572.173(c)(2) | Drawing No. 420-2060 | 2011 | Neck Cable | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Merphos [Tributyl phosphorotrithioate]) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 1310 | 1986 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xvi) | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B5 | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-P-21929C | 1991 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 56.6201(a)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Food and Drug Administration | 21 CFR 170.3(o) | NAS Report | 1972 | A Comprehensive Survey of Industry on the Use of Food Chemicals Generally Recognized as Safe | National Academy of Sciences, National Research Council | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.1.2 | 1991 | Air Gaps in Plumbing Systems | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.077-15(b)(12) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(iii)(1) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Environmental Protection Agency | 40 CFR 89.6(c)(3) | SAE Paper 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers |