This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 430.3(c)(13) | ANSI C82.2 | 2002 | Lamp Ballasts--Method of Measurement of Fluorescent Lamp Ballasts | American National Standards Institute | |
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.20 2008 Annex VI | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(L) | EPA Method 630 | 1993 | Dithiocarbamate Pesticides by UV-VIS Spectrophotometer | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | USGS I-3135-85 | 1989 | Cadmium, by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 63.404(a) | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1192 | ISO 10865-1:2012 | 2012 | Americans With Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.2100(a)(2) | SDUIC regulations | 1987 | Administrative Rules of South Dakota, sections 74:10:02 through 74:10:07, 74:10:09, and 74:10:11 published by the South Dakota Code Commission, as revised through October 4, 1987 | State of South Dakota | |
Food and Drug Administration | 40 CFR 1065.701 Table 1 | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-1972 | 1985 | Insulation Board, Thermal, Faced, Gen.; 1, 2, 3, Polyurethane and Polyisocyanurate | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 46 CFR 111.60-21 | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3270-85 | 1985 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 761.19(a)(5) | ASTM D 524 | 1988 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products | ASTM International | |
Energy Department | 10 CFR 434.402.2 | ASTM E 283 | 1991 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (RS-10) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(7) | ANSI Z41.1 | 2014 | Men's Safety-Toe Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.703(b)(3) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (31) | ASTM D 3590B | 2006 | Standard Test Methods for Total Kjeldahl Nitrogen in Water, Semiautomated Colorimetric Bertholt | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart MMMM, Appendix A, Section 3.2 | ASTM D 5291 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(i) | EPA-600-4-79-020 | 1983 | Method 272.1--Atomic Absorption: direct aspiration | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | UL 1058 | 1994 | Halogenated Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(4) | Drawing No. 78051-243 | 1996 | Washer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (2) | ASTM D 1943 | 1990 | Standard Test Method for Alpha Particle Radioactivity of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(18) | DOE IDO-12096 | 1982 | RESL Analytical Chemistry Branch Procedures Manual | U.S. Department of Energy | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/UL 913 | 2003 | Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 189.190(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Health and Human Services Department | 45 CFR 162.1202(b)(1) | NCPDP Publication | 1999 | Telecommunication Standard Implementation Guide, Version 5.1 | National Council for Prescription Drug Programs | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(81) | API MPMS | 2008 | Chapter 5—Metering, Section 6—Measurement of Liquid Hydrocarbons by Coriolis Meters; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (82) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl G | 2014 | Residual Chlorine by Spectrophotometric, DPD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (21) pH | EPA Method 150.1 | 1982 | pH, Electrometric Method | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(204) | ASTM E 2779 | 2010 | Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 56.6133(b) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 052 | 1976 | Forearm Hand Assembly, Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.2(a)(8) | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Housing and Urban Development Department | 24 CFR 100.201 Accessible | ICC/ANSI A117.1 | 2003 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Mine Safety and Health Administration | 30 CFR 75.1712-3(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Coast Guard | 46 CFR 113.25-6 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 193.2401 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 572.160(a)(1)(i) | LM Drawing No. 167–0000 | 2009 | Complete Assembly | Leet-Melbrook | |
National Highway Traffic Safety Administration | 49 CFR 572.34(a) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 98.144(b) | ASTM D 3682 | 2006 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes 2006 | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.1(c) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Environmental Protection Agency | 40 CFR 92.5(a)(1) | ANSI B109.1 | 1992 | Diaphragm Type Gas Displacement Meters | American National Standards Institute | |
Coast Guard | 46 CFR 58.30-15(c) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.156-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International |