This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.4(a) | UL All Standards | 1991 | All specifications, standards and codes without specific reference | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 157.12(b)(2) | IMO MPEC Resolution MEPC.108(49) | 2003 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.6(a)(22) | ASTM D 2503 | 1992 | Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Coast Guard | 46 CFR 111.54-1(c)(1)(ii) | ANSI/IEEE C37.27 (IEEE Std 331) | 1987 | Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuitbreakers (Using Separately Mounted Current-Limiting Fuses) | Institute of Electrical and Electronics Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.152(c)(3)(i) | Drawing No. 910420-003 | 1987 | Neck transducer mass simulator | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 3(b) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | 1983 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.3.3 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (23) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | APHA Method 4110 B | 2000 | APHA Standards On-line, Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(vi) | ANSI B31.1.0a Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1430/F 1430M | 2010 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (7) | APHA Method 9230 B | 2007 | Fecal Streptococcus and Enterococcus Groups, Multiple-Tube Technique | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.7(g)(5) | ISO/TR 15349-3 | 1998 | Unalloyed steel—Determination of low carbon content. Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating), First Edition | International Organization for Standardization | |
Health and Human Services Department | 45 CFR 162.1502(a) | ASC X12N 834 | 2000 | Benefit Enrollment and Maintenance, version 4010 | Washington Publishing Company | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 11 | ASTM E 162 | 1998 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Lindane) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.2145(s)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 662 | 1997 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-60 | 1998 | Pelvic Structure-Molded ASM-Hybrid III | General Motors Corporation | |
Coast Guard | 46 CFR 167.20-1(a) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.4 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 30.24(c) | ASTM E 100 | 1978 | Standard Specification for ASTM Hydrometers | ASTM International | |
Coast Guard | 46 CFR 110.10-1(d)(1) | ASME A17.1 | 2000 | Part 2, Electric Elevators | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (23) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 55.14(d)(3)(i) | 40 CFR part 52, subpart C | 2006 | State of California Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(ix)(A) | AASHTO LRFDLTS-1-I1-OL | 2017 | Interim Revisions to LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(C)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2564 | 1991 | Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 30 CFR 56.13030(d) | ASME B&PV Code | 1977 | Boiler and Pressure Vessel Code, Sections I-VII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3111 D | 1992 | Atomic Absorption Direct | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(ii) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 173.469(d)(1) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(A) | EPA Method 200.7 | 1994 | Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry. Revision 4.4 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 522.2640(a) | FDA Publication | 2001 | Determination of Factor Content in Tylosin by High Performance Liquid Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ISO 604:2002(E) | 2002 | Plastics—Determination of compressive properties, Third Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(D) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section C Fecal Coliform Methods, 2 Direct Membrane Filter (MF) Method, page 124 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 434.11(n) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(i) | ASTM D 5500 | 1998 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(11) | ASTM A 182/A 182M | 1997 | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 111.91-1 | ASME A17.1 | 2000 | Part 2 Electric Elevators | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 25.45-2(b)(3) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0031 | 1996 | Sampling Method for Volatile Organic Compounds (SMVOC) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.45(a) | FMVSS 106 | 1998 | Brake Hoses | National Highway Traffic Safety Administration, U.S. Department of Transportation |