This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-15(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(d)(3) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(11)(ii) | EPA-600-4-79-020 | 1983 | Method 353.1--Colorimetric automated, hydrazine reduction | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.151-15(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.170-5(b)(2) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 164.015-1(a)(1) | MIL-F-859E | 1965 | Fuel Oil, Boiler | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 213/A 213M | 1995 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat Exchanger Tubes | ASTM International | |
Coast Guard | 46 CFR 162.060-26(a) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 210/A 210M | 1996 | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | ASTM International | |
Coast Guard | 46 CFR 162.060-26(b) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 36 CFR 1238.14(c) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Coast Guard | 33 CFR 183.610(b) | AMCA 210 | 1974 | Laboratory Methods of Testing Fans for Ratings | Air Movement and Control Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 47 | 1990 | Standard Specification for Ferritic Malleable Iron Castings | ASTM International | |
Coast Guard | 46 CFR 160.076-11(b)(1) | UL 1123 | 2008 | Marine Buoyant Devices, Seventh Edition including revisions through February 14, 2011 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.120-5(d)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 38 CFR 17.1(b)(2) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1173 | 1995 | Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ASTM B 152 | 1997 | Standards Specification for Copper, Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(ii) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(22) | ASME B16.42 | 1998 | Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.812(a)(2) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (2) | EPA Method 310.2 | 1974 | Alkalinity as CaCO3 - Colorimetric, Automated | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 182.440(a)(2)(v) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-5(c)(3) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 127.1313(b) | NFPA 30 | 1993 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Coast Guard | 46 CFR 52.05-30(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 13 | ASTM B 171 | 1997 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | APHA Method 3112 B | 1999 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 58.03-1(j)(!) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 98.25-97(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(65) | ASTM B 315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(1) | FM Class No. 3260 | 1994 | Flame Radiation Detectors for Automatic Fire Alarm Signaling | Factory Mutual Engineering and Research | |
Coast Guard | 46 CFR 28.40(b) | ABYC H-25 | 1986 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 184.240(b) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 125.180(b) | IMO SOLAS | 1992 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 54.10-10(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 63.05-1(c)(1) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec QQ-W-423 | 1969 | Wire, Steel, Corrosion-Resisting | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 71.15-5(b) | ABS Publication | 1997 | U.S. Supplement to ABS Rules for Steel Vessels for Vessels of International Voyages | American Bureau of Shipping | |
Coast Guard | 46 CFR 148.450(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 108.649(e)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 71.15-5(b) | ABS Publication | 1996 | U.S. Supplement to ABS Rules for Steel Vessels for Vessels of International Voyages | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.005-4(e) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 114.600(b) | NFPA 17 | 1994 | Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 111.60-3(b)(1) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 153.930 | IMO Publication | 1976 | Medical First Aid Guide for Use in Accidents Involving Dangerous Goods | International Maritime Organization | |
Coast Guard | 46 CFR 154.1400(b)(8) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.055-3(h)(1) | MIL-W-17337D | 1989 | Webbing, Woven, Nylon | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.105-1 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association |