DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 121.240(h) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 33 CFR 155, Appendix B, 6.3 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Coast Guard | 46 CFR 53.01-10(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.15-13(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 131.110(d)(1) | AOAC Official Methods | 1989 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Section 310-13 | National Fire Protection Association | |
Coast Guard | 46 CFR 126.160(a) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Coast Guard | 33 CFR 127.1101(a) | ASME B31.3 | 1993 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 2880 | 1996 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 116.422(b)(2) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-8 | 1985 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 159.001-4 | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Coast Guard | 46 CFR 27.211(b) | ABYC H-25 | 1986 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 2 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CPM | U.S. Coast Guard | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(3)(iii) | EPA-600-4-79-020 | 1983 | Method 375.3--Gravimetric | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 169.703(c)(5)(iii) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.060-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5660 | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.077-23(h)(5) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.005-1(a)(2) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 182.430(k) | ABYC P-1 | 1993 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.133-13(d)(2)(iii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-15(m) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 164.018-11(c)(2) | Federal Test Method Standard 370 | 1977 | Instrumental Photometric Measurements of Retroflective Materials and Retroflective Devices | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 108.649(g) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D 3559B | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Coast Guard | 46 CFR 182.130 | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.135-13(d)(4)(vii) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 46 CFR 160.151-57(b)(11) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-11(c)(2)(i)(B) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 10.107(b) Credential (3) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 21 CFR 173.357(a)(2) | FDA Publication | 1989 | Methodology for Ethylenimine Detection in Polyethylinimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 143.405(a)(10) | UL 1123 | 1987 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 162.018-7(a) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Coast Guard | 21 CFR 1.24(a)(6)(iii) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 110.15-1(b), Corrosion resistant material or finish | IEC 68-2-52 | 1996 | Basic Environmental Testing Procedures, Part 2: Tests. Test KB: Salt Mist, Cyclic (Sodium Chloride Solution) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.01-2(e)(44) | ASTM B 21 | 1996 | Standard Specification for Naval Brass Rod, Bar, and Shapes | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(21) | ASME B16.34 | 1996 | Valves--Flanged, Threaded, and Welding End | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | ASTM D 2460 | 1990 | Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water | ASTM International | |
Coast Guard | 33 CFR 155.1050(k)(2)(iv) | ASTM F 1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
Coast Guard | 33 CFR 142.33(b) | ANSI Z41.1 | 1983 | Protective Footwear | American National Standards Institute | |
Coast Guard | 46 CFR 164.023-7(b)(1) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(5)(i) | EPA-600-4-79-020 | 1983 | Method 218.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-1(a) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 11 | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 268 | 1994 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 10.107(b) Invalid credential | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 33 CFR 155.230(b)(1)(i)(D) | ANSI A10.14 | 1991 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(ix) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 27 CFR 21.65(a) | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 116.300(b)(1) | Lloyd's Publication | 1990 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping |