This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-21(n) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.026-1(a)(2) | USPHS Publication 956 | 1965 | Drinking Water Standards | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.01-2(e)(16) | ASTM A 213/A 213M | 1995 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat Exchanger Tubes | ASTM International | |
Coast Guard | 46 CFR 160.151-15(h) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(e)(2) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-1 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 1: General Requirements, Edition 4.2 2012-06 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.75-20(e) | UL 1598 | 2000 | Luminaires, First Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 113.37-10(b) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.170-5(c)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 21 CFR 131.170(f) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.01-2(d)(11) | ASME B16.14 | 1991 | Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 131.112(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 162.060-30(a)(7) | IEC 60529 | 2001 | Classification of Degrees of Protection by Enclosures (IP Code), Edition 2.1 consolidated with amendment 1:1999 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.60-3(a)(2) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IG (Bromoxynil) | EPA Method 1625 | 1984 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 101.115(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 33 CFR 157.02(b)(2) | IMO Resolution A.496(XII) | 1981 | Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(d)(7) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
Coast Guard | 21 CFR 101.9(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 54.01-1(e)(1) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(ii) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 160.151-21(f) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.057-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 58.03-1(g)(1) | ASTM A 193/A 193M | 1998 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 183.320(d) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-10(b)(2) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 129.550(a) | NFPA 302 | 1989 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 199.261(g) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 53.01-1(b)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-25(a)(2)(ii) | IMO Resolution A.753(18) | 1993 | Guidelines for the Application of Plastic Pipe on Ships | International Maritime Organization | |
Coast Guard | 36 CFR 1238.20(b) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Coast Guard | 46 CFR 199.175(b)(28)(i) | ASTM F 1003 | 1992 | Standard Specification for Searchlights on Motor Lifeboats | ASTM International | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 184.240(c) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 38 CFR 17.82(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 174.100(e)(3) | ASTM F 1196 | 2000 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 56.30-30(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 154.1400(b)(6) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 111.105-15(b) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 125.180(b) | NFPA 10 | 1994 | Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 40 CFR 60.116b(f)(2)(i) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 15.1103(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 118.425(b) | NFPA 17A | 1994 | Wet Chemcial Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 148.220(b)(1) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations |