This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.22(a) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.3(e)(1) | CI A Kit | 2003 | Chlorine Institute Emergency Kit "A" for 100-lb. & 150-lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9978 | 1992 | Sealed Radioactive Sources--Leakage Test Methods | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.220-7 | ASTM A 516 | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 606 | 1975 | Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.307(a)(4)(iv) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.403 S7.2.2 | RESNA Standard WC/Vol. 1 | 1998 | Determination of Coefficient of Friction of Test Surfaces | Rehabilitation Engineering and Assistive Technology Society (RESNA) | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(a) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.46(b)(4) Table 1, Note 2 | ASTM B 221 | 1976 | Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(e)(4) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.735(b) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315(i)(12) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.55(d)(3) | CGA C-3 | 1994 | Standard for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.935(b)(1)(iv) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(4) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (32) | USGS I-4403-89 | 1978 | Lead by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-2.2 | 1985 | Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(l)(1)(ii) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.185(a)(1) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.227(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102 code/special provisions 160 | Manual of Tests and Criteria | 2019 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.411(b)(4)(ii) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.84(b) 144 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.31(a)(8) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a)(1) | ASTM A 1011/A 1011M | 2003 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.3(e)(2) | CI B Kit | 2003 | Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.2(a)(8) | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.283(b)(1) | ASTM D 638 | 2003 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.220-7 | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(r)(2) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.360-4(a)(2)(i) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 46 CFR 160.026-4(a) | USPHS Publication 956 | 1965 | Drinking Water Standards | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(b) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(40) | EPA-821-B-98-016 | 1998 | Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1667 | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-17(b) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.115(c)(2) | CGA P-20 | 1995 | Standard for the Classification of Toxic Gas Mixtures | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.921(a)(1) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.11(b) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315(m)(2) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178, Appendix A, Table 1 Note 2 | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.207(d)(2) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization |