Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.155(i)(2) | ASTM D 93 | 1969 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(3)(i) | SAE J-185 | 2003 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1917.94(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.157 (4) | NFPA Publication | 2013 | NFPA Handbook | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(4) | SAE J-168 | 1970 | Protective Enclosures—Test Procedures and Performance Requirements | Society of Automotive Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks, Eleventh Edition | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1825 | 2007 | Standard Specification for Clampstick Type Live Line Tools | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1067 | 2005 | Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC | Institute of Electrical and Electronics Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(q)(33) | NFPA 656 | 1959 | Code for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1918.3(b)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(10) | ANSI A17.1 | 1965 | Safety Code for Elevators, Dumbwaiters, and Moving Walks | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (7)(D) | NIOSH Publication | 1976 | The Development of Criteria for Firefighters' Gloves; Vol. I: Glove Requirements | National Institute for Occupational Safety and Health | |
| Occupational Safety and Health Administration | 29 CFR 1915.507(d)(1) | NFPA 14 | 2003 | Standard for the Installation of Standpipe, Private Hydrant, and Hose Systems | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 178 | 2001 | Standard Specification for Rubber Insulating Matting | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.265(c)(2) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(h)(1) | ASTM A 47 | 1968 | Malleable Iron Castings | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(d)(3) | ANSI/NFPA 14 | 2014 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(8) | ASME B30.14, Section 14-1.7.6 | 2004 | Side Boom Tractors, General Requirements—Clutch and Brake Protection. | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(h)(12) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators (Inspector's Manual) Supplement | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.50 Appendix A | ANSI Z308.1 | 1978 | Minimum Requirements for Industrial Unit-Type First-aid Kits | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.402(a) Note | ANSI/NFPA 70 | 1984 | National Electrical Code, exclusive of Formal Interpretations and Tentative Interim Amendments | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (7)(D) | Federal Standard 191 | 1978 | Textile Test Method 5903 | Federal Specifications Standards and Test Methods | |
| Occupational Safety and Health Administration | 29 CFR 1910.269(v)(3) Note (3) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(u)(5) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(1) | ANSI/NFPA 10 | 2014 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(22) | ANSI B31.1 | 1955 | Code for Pressure Piping | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 887 | 2012 | Standard Specifications for Personal Climbing Equipment | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1915.507(d)(4) | NFPA 17 | 2002 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.109(i)(6)(ii) | NFPA 78 | 1968 | Lightning Protection Code | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(a)(2)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(ii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1918.103(b)(1)(i) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1915.505(c)(2) | 29 CFR 1915.154 | 2014 | Respiratory Protection | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(h)(29) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 69 | 2014 | Explosion Suppression Systems | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(w)(2) | IME Publication 20 | 1968 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | ANSI/NFPA 11B | 2014 | Synthetic Foam and Combined Agent Systems | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association |