This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(g)(114) | ASTM D 2986 | 1971 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Mine Safety and Health Administration | 30 CFR 77.801-1 | IEEE 32 | 1971 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Mine Safety and Health Administration | 30 CFR 75.1107-3(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Rural Utilities Service | 29 CFR 1926.6(y)(1) | NFPA 10A | 1970 | Maintenance and Use of Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(21) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 1.7 | ANSI B38.1 | 1970 | Method of Testing for Household Refrigerators, Combination Refrigerator Freezers and Household Freezers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.303(d) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 60 | 1970 | Field Glued Plywood and Wood Frame Structural Floor Systems | U.S. Department of Housing and Urban Development | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.11.3(b) | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Coast Guard | 46 CFR 129.550(a) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-3 | 1970 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 11A | 1970 | Standard for Medium- and High-Expansion Foam Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE J-167 | 1970 | Protective frame with overhead protection—test procedures and performance requirements | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(4) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(15) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.204(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(i) | ASTM D 56 | 1970 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.55(a) Appendix A | ACGIH Publication | 1970 | Threshold Limit Values | American Conference of Governmental Industrial Hygienists | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) Table H-24 Footnote 1 | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Coast Guard | 46 CFR 160.005-1(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(i) | NFPA 32 | 1970 | Standard for Dry Cleaning Plants | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 28 | ENH Journal of Chromatography | 1970 | Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography | Elsevier/North-Holland, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(2) | NFPA 32 | 1970 | Standard for Dry Cleaning Plants | National Fire Protection Association | |
Coast Guard | 46 CFR 164.018-11(d)(2) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S7.6 | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(3)(ii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.214(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(19) | ASTM D 1193 | 1970 | Standard Specification for Reagent Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(ii) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.13.2 | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(1) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.218(j)(5) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 264.314(d)(2)(i) | ASTM G 21 | 1970 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.150(c)(1)(viii) | NFPA 10A | 1970 | Recommended Good Practice for the Maintenance and Use of Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(3)(iii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(a)(5)(i) | SAE J-168 | 1970 | Protective Enclosures--Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.224(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Consumer Product Safety Commission | 16 CFR 1201.2(c) | Publication | 1970 | Test Methods and Recommended Practices | ASTM International | |
National Highway Traffic Safety Administration | 21 CFR 177.1810(c)(2)(i) | ASTM D 2236 | 1970 | Standard Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(5)(i)(A) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(6) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(13)(ii)(B)(1) | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(19) | NFPA 80 | 1970 | Standard for the Installation of Fire Doors and Windows | National Fire Protection Association |