This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1051 | SAE J2951_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | SAE J2264_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 430.01(i) Table | EPA Method 1650 | 2014 | Adsorbable Organic Halides by Adsorption and Coulometric Titration | U.S. Environmental Protection Agency | |
Health and Human Services Department | 87 FR 50698 | 21 CFR 808 | ANSI/ASA S3.22–2014 (R2020) | 2014 | Medical Devices; Ear, Nose, and Throat Devices; Establishing Over-the-Counter Hearing Aids | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(2)(iv) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 136.6(b)(4)(x) | EPA Method 130.1 | 2014 | Hardness - Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.8(c) | ASTM D 5842 | 2014 | Standard Practice for Sampling and Handling of Fuels for Volatility Measurement | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 72B | 2014 | Auxiliary Signaling Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (strontium) | APHA Method 3125 | 2014 | Metals by Inductively Coupled Plasma/Mass Spectrometry | American Public Health Association | |
Energy Department | 10 CFR 431.96 (g)(4) | AHRI 310/380-2014 | 2014 | Standard for Packaged Terminal Air-Conditioners and Heat Pumps | Air Conditioning, Heating, and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Free Chlorine) | APHA Method 4500-Cl F | 2014 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | API RP 500 | 2014 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(84) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii) | 29 CFR 1910.107(b)(4) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.820 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 61 | SW–846 Method 6010D | 2014 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4161 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals | ASTM International | |
Energy Department | 88 FR 40406 | 10 CFR 429 | ANSI/ASHRAE 41.6-2014 | 2014 | Energy Conservation Program: Test Procedure for Consumer Water Heaters and Residential-Duty Commercial Water Heaters | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(9) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 71 | 2014 | Central Station Signaling Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 272, Subpart AAA | GUHWMP | 2014 | Territory of Guam Hazardous Waste Management Program (Reserved) | Guam Territory | |
Coast Guard | 40 CFR 60.335(b)(4) | EPA Method 7E | 2014 | Determination of Nitrogen Oxides Emissions From Stationary Sources (Instrumental Analyzer Procedure) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.51(a)(6) | 40 CFR Part 141 | 2014 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.405(c)(2)(ii)(J) | ANSI/NFPA 70 | 2014 | National Electrical Code, Article 400, Table 400-4 | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(2) | ANSI/NFPA 13A | 2014 | Standard for the Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Energy Department | 10 CFR 429.134(i)(3)(iv)(A)(1) | HI 40.6-2014-B | 2014 | Methods for Rotodynamic Pump Efficiency Testing | Hydraulic Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(1) | ANSI/NFPA 10 | 2014 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.218(e)(1)(iv) | ANSI B31.1.0 Addenda | 2014 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Federal Communications Commission | 47 CFR 15.31(a)(4) | ANSI C63.4-2014 | 2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(12)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 147.2850 | RMIUIC regulations | 2014 | State-administered program (Reserved) | Trust Territory of the Pacific, Republic of the Marshal Islands | |
Labor Department | 41 CFR 50-204.2(a)(2)(i) | 30 CFR Chapter I, Subchapter O | 2014 | Coal Mine Health and Safety | Bureau of Mines, U.S. Department of Interior | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(1)(ii) | 29 CFR 1910.107(a) | 2014 | Spray Finishing Using Flammable and Combustible Materials, Definitions | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 40 CFR 60.335(a)(3) | EPA Method 3 | 2014 | Gas analysis for the determination of dry molecular weight | U.S. Environmental Protection Agency | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 175 | 2014 | Carriage by Aircraft | U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1033 | SAE J2951_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1066.425(j)(1) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Energy Department | 88 FR 28780 | 10 CFR 431 | ANSI/ASHRAE 41.3–2014 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Environmental Protection Agency | 40 CFR 147.2000(b)(5) | RIUIC regulations | 2014 | Rhode Island General Laws, Section 46-12-1 et seq., entitled, Water Pollution | State of Rhode Island | |
Environmental Protection Agency | 40 CFR 63.694(j)(2)(i) | EPA SW-846 | 2014 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 C | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ANSI Z136.1-2014 | 2014 | Worker Safety and Health Program | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(22) | ANSI Z88.5 | 2014 | Practice for Respiratory Protection for the Fire Service | American National Standards Institute | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 51 | SW–846 Method 6020B | 2014 | Test Methods and Performance Specifications for Air Emission Sources | U.S. Environmental Protection Agency |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 59 | SAE J2264_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 147.52(a) | ALUIC regulations | 2014 | State Oil and Gas Board of Alabama Rule 400-4-1-.02, Definitions, and Rule 400-4-5-.04, Protection of Underground Sources of Drinking Water during the Hydraulic Fracturing of Coal Beds | State of Alabama | |
Occupational Safety and Health Administration | 29 CFR 1910.261(j)(4)(iii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 101 | 2014 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1042 | SAE J2264_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 268.7(a)(1) | EPA SW-846 | 2014 | Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency |