This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.47(r)(1)(v) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1031 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Revised recommendation on testing | 2010 | Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1048 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 86.1(b)(9) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(iii) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1430/F 1430M | 2010 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments | ASTM International | |
Coast Guard | 33 CFR 145.01 | NFPA 10 | 2010 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Coast Guard | 33 CFR 149.408(a) | NFPA 10 | 2010 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1039 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(f) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction, Second Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (24A) | OIA Method OIA-1677-09 | 2010 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry | OI Analytical | |
Coast Guard | 46 CFR 160.133-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.14(g)(66) | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Transportation Department | 85 FR 75680 | 49 CFR 180 | 2010/35/EU | 2010 | Hazardous Materials: Adoption of Miscellaneous Petitions To Reduce Regulatory Burdens | European Union of Agreement Technical Committee |
Environmental Protection Agency | 40 CFR 80.580(c)(2)(i) | ASTM D 4294 | 2010 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.3.3 | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.151-17(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-5(d)(4) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A, (a) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Veterans Affairs Department | 38 CFR 17.74(g)(5) | NFPA 72 | 2010 | National Fire Alarm and Signaling Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.7575 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB Footnote 44 | OIA Method OIA-1677-09 | 2010 | Available Cyanide by Ligand Exchange and Flow Injection Analysis (FIA) | OI Analytical | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1060 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 63.10042 Distillate oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.051-7(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 85 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Coast Guard | 46 CFR 160.135-5(d)(4) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances, pages 79-254 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(n) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(h) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 600.311-12(c)(2)(ii) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(15) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(i) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 1066.310(b)(8)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 80.46(e) | ASTM D 3606 | 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3299 | 2010 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Environmental Protection Agency | 40 CFR 63.11237 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(4) | ASTM D 396 | 2010 | Standard Specification for Fuel Oils, including Appendix X1 | ASTM International | |
Coast Guard | 46 CFR 160.170-15(f) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization |