This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(D) | NFPA 96 | 1970 | Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment | National Fire Protection Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(ii) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix A (1)(b)(i) | NFPA Publication | 2014 | National Design Specification for Wood Construction | National Forest Products Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 609 | 1982 | Nitroaromatics and Isophrone by GC/ECD/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg B | 1998 | Magnesium, Calculation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7420 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 52.741(j)(3)(ii) | 35 I.A.C. 215, Subpart R | 1989 | Section 215.449 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860, Appendix A-III-5-b | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-2(f) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
Securities and Exchange Commission | 17 CFR 232.301 | EDGAR Filer Manual | 2005 | Guide for Electronic Filing with the U.S. Securities and Exchange Commission, Volume III--EDGAR ONLINEFORMS Filer Manual | Securities and Exchange Commission | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB Footnote 10 | ISI Method 1003-8 | 2009 | Biochemical Oxygen Demand (BOD) Measurement by Optical Probe | In-Situ Incorporated | |
Coast Guard | 40 CFR 136.3(a) Table IB (5) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(viii) | EPA Method 0011 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.28 | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Coast Guard | 46 CFR 53.01-3(b) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (45) | EPA Method 252.2 | 1978 | Osmium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(d)(7) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3282.358(d) | ASTM E 541 | 2010 | Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building | ASTM International | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table Note 1 | APHA Standard Methods, 19th Edition | 1995 | Standard Methods for the Examination of Water and Wastewater, 19th Edition | American Public Health Association | |
Energy Department | 10 CFR 431.105(d)(2)(i) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.151-21(u) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1048.110(g)(2) | ISO 14230-4 | 2000 | Road vehicles—Diagnostic systems—Keyword Protocol 2000—Part 4: Requirements for emission-related systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethyl acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2251(a)(1) | UTUIC regulations | 1990 | Utah Code Annotated, 1953, section 40-6-1 through 40-6-18, as amended 1988 and Cumm. Supp. 1990 | State of Utah | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (3)(b) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14131(c) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 21 | 1996 | Standard Specification for Naval Brass Rod, Bar, and Shapes | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(B)(3)(iii) | ASTM D 3792 | 1986 | Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Food and Drug Administration | 21 CFR 131.125(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 45 CFR 162.920(c)(4)(vi) | CAQH Publication | 2012 | Phase III CORE 350 Health Care Claim Payment/Advice (835) Infrastructure Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Research and Special Programs Administration | 49 CFR 195.432(b) | API 653 | 2003 | Tank Inspection, Repair, Alteration, and Reconstruction | American Petroleum Institute | |
Coast Guard | 46 CFR 78.17-75(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(c) | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Public Health Service | 42 CFR 52b.12(c)(10) | AIHA Publication | 1994 | Laboratory Ventilation Workbook | American Industrial Hygiene Association | |
Research and Special Programs Administration | 49 CFR 178.255-2(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 761.19(a)(14) | ASTM D 3178 | 1984 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coke and Coal | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(1) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(d) | ABYC A-1 | 1993 | Marine Liquified Petroleum Gas (LPG) Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.77(d) | Drawing No. SA 106C 072 | 1997 | Leg Assembly, Left, Revision A | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (94) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 321.8 | 1997 | Determination of Bromate in Drinking Waters by Ion Chromatography Inductively Coupled Plasma - Mass Spectrometry, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61.18(e)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
Occupational Safety and Health Administration | 29 CFR 1910.179(c)(2) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1095(b) | Food Chemicals Codex | 1981 | Sulfuric Acid | National Academy Press |