This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.613(e)(3)(iii)(C) | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 147.2850 | RMIUIC regulations | 2014 | State-administered program (Reserved) | Trust Territory of the Pacific, Republic of the Marshal Islands | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-1(a)(1) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4160 | 1982 | Specification for Reinforced Thermosetting Resin Pipe (RTRP) Fittings for Nonpressure Applications (Withdrawn 1989) | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM D 5 | 1978 | Standard Test Method for Penetration of Bituminous Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 796.1950(b)(2)(i) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) B12 | API 2000 | 1998 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.485(g)(5) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 728 | 1989 | Standard Specification for Perlite Insulation Board | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Coast Guard | 46 CFR 154.1(b) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (18) | IES LM-45 | 1980 | IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps | Illuminating Engineering Society of North America | |
Research and Special Programs Administration | 49 CFR 176.11(a) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(53) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulphur Fires and Explosions | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.926d(b)(3) | 24 CFR 51 | 2013 | Environmental Criteria and Standards | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(ii) | ASTM D 792 | 2008 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453 Note | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | RSILR Publication | 1982 | Determination of Ra-226 and Ra-228 (Ra-02) | State of New York (NY) | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Sulfur Dioxide | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.077-21(c)(4)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 200.929(a) | HUD MPS | 2013 | Minimum Property Standards | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg E | 1995 | Magnesium | American Public Health Association | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | USGS I-3462-85 | 1985 | Mercury by Cold Vapor Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7760 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.859(b)(10) | FDA Publication | 1996 | Determination of Dimethyl Sulfoxide | Food and Drug Administration, U.S. Department of Health and Human Services | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.54(a) | The United States Pharmacopoeia | 1980 | Formula No. 27-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 56.85-10 Table 56.85-10 | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.890(k)(6)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI Z34.1 | 1987 | Certification, Third-Party Certification Program | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 92 | 1990 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(6) | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-3000 | 2001 | Upper/Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (45) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Osmium | American Public Health Association | |
Rural Utilities Service | 7 CFR 1724, Appendix A to Subpart E | USACE ER 1110-2-1155 | 1995 | U.S. Army Corps of Engineers Engineering and Design Dam Safety Program, Appendix E | Department of the Army, U.S. Army Corps of Engineers | |
Food and Drug Administration | 21 CFR 118.8(a) | FDA Publication | 2008 | Environmental Sampling and Detection of Salmonella in Poultry Houses | Food and Drug Administration, U.S. Department of Health and Human Services | |
Veterans Affairs Department | 38 CFR 17.63(a)(4) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1048.110(g)(1) | ISO 9141-2 | 1994 | Road vehicles-Diagnostic systems—Part 2: CARB requirements for interchange of digital information | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559B | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(d)(6) | ASME MFC-9M | 2001 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1918.103(b)(2) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute |