This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B43 | 1996 | Standard Specification for Seamless Red Brass Pipe | ASTM International | |
Research and Special Programs Administration | 45 CFR 162.920(a)(10) | ASC X12 | 2007 | Type 1 Errata to Health Care Claim Dental (837), Standards for Electronic Data Interchange Technical Report Type 3 | Washington Publishing Company | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(43) | ASTM D975 | 1978 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.26(c) | ASTM D4965 | 2004 | Standard Specification for Retroreflective Sheeting for Traffic Control | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(xii) | ASTM D2859 | 1976 | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (22) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 52.741(s)(1)(i)(A) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 63.14(k)(6)(i) | NH State Regulations | 2003 | New Hampshire Regulations Applicable to Hazardous Air Pollutants | State of New Hampshire | |
Energy Department | 10 CFR 430 Subpart B, App. F, 2.2 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.015-4(h)(1) | Federal Standard 601 | 1955 | Rubber, Sampling and Testing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 F | 1992 | Ammonia Nitrogen by Ion Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.5 | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Coast Guard | 46 CFR 115.710(a) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 26 | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(t) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(7)(v)(B) | ASTM D4444 | 2013 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 C | 1997 | Ammonia Nitrogen by Titration | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.903(g)(3)(i) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Coast Guard | 46 CFR 160.060-5(c) | Drawing No. 160.060-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model AY | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 184.1408(b)(3) | Food Chemicals Codex | 1981 | Acid unsoluble ash | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(27) | SAE J-839b | 1965 | Passenger Car Side Door Latch Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (43) | USGS O-2060-01 | 2001 | Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.200(a)(4) | ARUIC regulations | 1972 | General Rule and Regulations, Arkansas Oil and Gas Commission (Order No. 2-39, revised July 1972) | State of Arkansas | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D4184 | 1982 | Specification for Reinforced Thermosetting Resin (RTRP) Sewer Pipe (Withdrawn 1986) | ASTM International | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Coast Guard | 46 CFR 177.300(b)(2) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(3) | AWS B3.0 | 1941 | Standard Qualification Procedure | American Welding Society | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D2459 | 1972 | Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Sulfur Dioxide | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.305(c)(1)(ii)(A) | ANSI/ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Coast Guard | 46 CFR 182.320(a)(3) | UL 174 | 1989 | Household Electric Storage Water Heaters | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 172.860(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Aviation Administration | 14 CFR 135.168(F)(2)(ii) | RTCA DO-204A | 2007 | Minimum Operational Performance Standards (MOPS) 406 MHz Emergency Locator Transmitters (ELT) | Radio Technical Commission for Aeronautics | |
Research and Special Programs Administration | 49 CFR 178.37(k)(3)(i) | ASTM E8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C726 | 1988 | Standard Specification for Mineral Fiber and Roof Insulating Board | ASTM International | |
Federal Railroad Administration | 49 CFR 232.103(l) | AAR S-469-47 | 1999 | Performance Specification of Freight Brakes | Association of American Railroads | |
Coast Guard | 46 CFR 111.54-1(c)(1)(i) | IEEE C37.13 | 1990 | Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.2.1 | ASTM D3174 | 2000 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.7.3.1.2 | SAE J-2009 | 1993 | Forward Discharge Lighting Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(6) | SAE J-236 | 1971 | Self-Propelled Graders | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(iii) | 29 CFR 1910.107(b)(4) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor |