This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 182.445(f) | ABYC H-24 | 1993 | Gasoline Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(168) | ASTM D 5287 | 2002 | Standard Practice for Automatic Sampling of Gaseous Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 172.736(b)(3) | AOCS Method Ca 18c-91 | 1995 | Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry | American Oil Chemists Society | |
Veterans Affairs Department | 38 CFR 17.74(e) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(38) | SAE J-972 | 2000 | Moving Rigid Barrier Collision Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.1350(a)(2) | MTUIC regulations | 1996 | Montana Regulatory Requirements Applicable to the Underground Injection Control Program | State of Montana | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7120 | 1997 | Gamma-Emitting Radionuclides | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 129 | 2005 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.402(c) Table 3 Note 11 | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1987 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.153(b)(2) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.860(e)(6) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-28C | 1977 | Specification for L-851 Visual Approach Slope Indicators and Accessories | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 1051.501(d)(1)(ii) | 40 CFR 1065.703 | 2012 | Distillate diesel fuel | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption, Revision 3.0 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(3) | ASTM D 1640 | 1983 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.130(e) | 40 CFR 1065.655 | 2012 | Chemical balances of fuel, intake air, and exhaust | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 35.25-10(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 54 | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AAMA 1503.1 | 1988 | Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections | American Architectural Manufacturers Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F B | 1995 | Fluoride Distillation | American Public Health Association | |
Energy Department | 10 CFR 430.3(c)(1) | ANSI C78.3 | 1991 | American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 160.135-13(d)(4)(vii) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.1(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(J) | EPA Method 627 | 1997 | The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | ASTM D 3557D | 2002 | Cadmium in Water by Graphite Furnace Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(4) | SAE J-1877 | 1994 | Recommended Practice for Bar-Coded Vehicle Identification Number Label | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (3) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2050(b)(4) | SCUIC regulations | 1976 | S.C. Code Ann. Sections 15-5-20, 15-5-200 (Law. Co-op. 1976 and Supp. 1983) | State of South Carolina | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 780.25(a)(4) | USDA Technical Release 210-VI-TR60 | 2005 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Coast Guard | 21 CFR 172.723(b)(1) | AOCS Method Cd 9-57 | 1989 | Oxirane Oxygen | American Oil Chemists Society | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(3) | ASTM D 240 | 1987 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 139.110(a)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1910 | 2014 | General Industry Safety and Health Standards, Subparts C through S | Occupational Safety and Health Administration, U.S. Department of Labor | |
Research and Special Programs Administration | 49 CFR 173.469(d)(1) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B16.15 | 1985 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. |