This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (9) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 5 | USGS I-3720-85 | 1985 | Silver chelation/extraction by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.202(c) Table | ASTM D 2487 | 2000 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.338-2(a) | ASTM A 441 | 1981 | High-Strength Low-Alloy Structural Manganese Vanadium Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Endrin) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2, Footnote (d) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM D 610 | 1989 | Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.1730(a) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-1D | 1973 | Marking of Paved Areas on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 21 CFR 101.81(c)(2)(ii)(B)(2) | AOAC Publication | 1995 | Determination of Soluble and Insoluble Dietary Fiber in Psyllium-containing Cereal Products | AOAC International | |
Rural Utilities Service | 7 CFR 1755.390(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 178.1010(c)(29) | BII Publication | 1987 | Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm Available ClO2) | Bio-cide International, Inc. | |
Coast Guard | 46 CFR 160.151-21(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (23) | ASTM D 7511 | 2009 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection | ASTM International | |
Labor Department | 41 CFR 50-204.75 | NCUTLO Code | 1962 | Uniform Vehicle Code, Chapters 10, 11, 12, and 14 | National Committee on Uniform Traffic Laws and Ordinances | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(1)(vi) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 10 CFR 430 Subpart B, App. N, 2.2 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 164.120-5(b)(8) | ASTM D 1824 | 2002 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.9630(f)(7) | EPA-540-09-91-123 | 1991 | Neurotoxicity Screening Battery. In: Pesticide Assessment Guidelines, Subdivision F, Addendum 10 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.71(b) Table A | Drawing No. SA 106C 041 | 1997 | Arm Assembly, Right, Revision A | Reprographic Technologies | |
Coast Guard | 46 CFR 160.077-11(c)(1)(ii) | UL 1191 | 2013 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 4 | USGS Publication | 1989 | Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.3) | EPA-600-4-80-025 | 1980 | Performance Tests for the Evaluation of Computerized Gas Chromatography/Mass Spectrometry Equipment and Laboratories | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(m)(5) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(i)(A) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.7(e)(14) | ASTM D 2502 | 2004 | Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils From Viscosity Measurements | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 173.357(a)(2) | FDA Publication | 1977 | Methodology for Molecular Weight Determination of Polyethylenimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.3161(g) | ASTM D 5066 | 2001 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(ii) | ANSI/ISEA Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | International Safety Equipment Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Mine Safety and Health Administration | 30 CFR 70.1900(c) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.1.1 | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.21 | 1987 | Automatic Valves for Gas Appliances | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(k)(1) | NHTSA Drawing Package, NHTSA-213 | 2003 | NHTSA Standard Seat Assembly; FMVSS No. 213, (consisting of drawings and a bill of materials) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Coast Guard | 46 CFR 114.600(b) | ASTM D 2863 | 1995 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (28) | EPA Method 150.2 | 1982 | ph - Electrometric, continuous monitor | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S7.6 | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Drug Enforcement Administration | 21 CFR 1300.03 FIPS 186-2 | FIPS Publication 186-2 | 2000 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Public Health Service | 42 CFR 37.51(d)(1)(i) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(7) | SAE J-237 | 1971 | Front End Loaders and Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (36) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2600(a)(3) | GUUIC regulations | 1982 | Guam Environmental Protection Agency, Underground Injection Control Regulations, Chapters 1-9, as revised by amendments adopted September 24, 1982 | Guam Territory | |
Research and Special Programs Administration | 49 CFR 179.200-10(a) | AAR Publication | 2000 | Specification for Tank Cars, Appendix W | Association of American Railroads |