This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 143.4(b) Table (Maganese) | APHA Method 3113 B | 1999 | APHA Standards On-line, Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 65.147(b)(3)(ii) | ASTM D 1946 | 1977 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (33) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Simazine) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(iv) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 182.130 | ABYC H-25 | 1994 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1926.6(m)(1) | AWS D1.1/D1.1M | 2002 | Structural Welding Code—Steel, 18th ed. | American Welding Society | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 4.3 | EPA-600-4-90-0003 | 1989 | Quality Assurance Handbook for Air Pollution Measurement Systems: Volume IV. Meteorological Measurements | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.505(f)(6) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.010-5(b)(2) | MIL-P-19644C | 1970 | Plastic Foam, Molded Polystyrene (Expanded Bead Type) | U.S. Department of Defense | |
Coast Guard | 46 CFR 90.05-10(a)(2)(i) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 27 CFR 21.32(a) | National Formulary | 1980 | Formula No. 1 | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 195.222(a) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 29 CFR 1918.103(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.68(b)(12) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Food and Drug Administration | 21 CFR 166.110(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(11) | ANSI A17.2a | 1965 | Practice for the Inspection of Elevators | American National Standards Institute | |
Federal Communications Commission | 47 CFR 80.1101(c)(11)(i) | IMO Resolution A.812(19) | 1995 | Performance Standards for Float-Free Satellite EPIRBs Operating Through the Geostationary INMARSAT Satellite System on 1.6 GHz | International Maritime Organization | |
Coast Guard | 46 CFR 160.170-5(c)(4) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 164.023-3(b)(5) | FedSpec V-T-295E | 1985 | Thread, Nylon | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 173.337(b) | FedSpec RR-C-901D | 2003 | Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.3 | ASTM D 3792 | 1979 | Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASTM A 36/A 36M | 1997 | Standard Specification for Carbon Structural Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Energy Department | 10 CFR 434.402.1.2.4(b)(2) | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-9(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
National Highway Traffic Safety Administration | 49 CFR 572.184(a) | Drawing No. 175-0000 | 2009 | ES-2re Dummy Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(T) | EPA Method 410.3 | 1978 | Chemical Oxygen Demand - Titrimetric (high-level) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | ARI 700 | 1988 | Specifications for Fluorocarbon Refrigerants | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1751(b)(4) | NDUIC regulations | 1983 | North Dakota Administrative Code Article 33-22 (Practice and Procedure) | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.7944(b)(2)(iv) | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(l)(6) | EPA SW-846-7471B | 2007 | Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2 | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(23) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
Coast Guard | 46 CFR 160.010-3(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 282.83(d)(1)(i)(A) | NCUSTP | 1997 | North Carolina Statutory Requirements Applicable to the Underground Storage Tank Program | State of North Carolina | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 404.3 | BHMA A156.19 | 2002 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ASTM C 36/ C 36M | 1999 | Standard Specification for Gypsum Wallboard | ASTM International | |
Food and Drug Administration | 21 CFR 184.1804(b) | Food Chemicals Codex | 1981 | Sodium Potassium Tartrate | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(2) | RT Publication | 2000 | Procedures for Assembly, Disassembly, and Inspection (PADI) Subpart O Hybrid III Fifth Percentile Adult Female Crash Test Dummy (HIII-5F), Alpha Version | Reprographic Technologies | |
Minerals Management Service | 30 CFR 250.1900(a) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
National Highway Traffic Safety Administration | 49 CFR 572.18(a) | Drawing No. SA 103C 030 | 1976 | Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(2)(iii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers |